FS: 18 inch CCW Classic wheels - freshly rebuilt
#1
FS: 18 inch CCW Classic wheels - freshly rebuilt
Set of 18 x 9 and 18 x 10 CCW Classic wheels which have been freshly rebuilt. I purchased and rebuilt these in 2013. They have never been used since the rebuild and have been in storage. I ended up never needing 2 sets of wheels for this vehicle.
They are unique in that CCW usually only does type 2 anodizing of their centers which is purely cosmetic and easily stained/discolored. I had the centers type 3 hard anodized in a gunmetal grey which is very tough and highly resistant to scratching/staining (aka mil spec anodizing). The polished barrels were clear coated. All hardware was replaced with new hardware ordered from CCW as shown in the rebuild thread here:
https://rennlist.com/forums/924-931-...-pictures.html
They were custom ordered to perfectly fill the guards on a 951 with the widest width possible without rubbing. They will only fit if you are running coilovers with 2.25" springs at the front. They fit perfectly with the Bilstein escort cup suspension on my 951. Please see the original build thread for photos. My camera seems to have poor color accuracy.
Asking $2,200 pickup in Nashville TN. At this stage I don't have time to box and ship these out.
They are unique in that CCW usually only does type 2 anodizing of their centers which is purely cosmetic and easily stained/discolored. I had the centers type 3 hard anodized in a gunmetal grey which is very tough and highly resistant to scratching/staining (aka mil spec anodizing). The polished barrels were clear coated. All hardware was replaced with new hardware ordered from CCW as shown in the rebuild thread here:
https://rennlist.com/forums/924-931-...-pictures.html
They were custom ordered to perfectly fill the guards on a 951 with the widest width possible without rubbing. They will only fit if you are running coilovers with 2.25" springs at the front. They fit perfectly with the Bilstein escort cup suspension on my 951. Please see the original build thread for photos. My camera seems to have poor color accuracy.
Asking $2,200 pickup in Nashville TN. At this stage I don't have time to box and ship these out.
Last edited by s14kev; 07-21-2017 at 07:15 PM.
#5
USA made in Missouri. They are forged, lightweight wheels. Company is great to deal with and very responsive to parts. All hardware, lug seats etc were easily available from them during the rebuild. They supply many race wheels in addition to street wheels so are used to supplying individual parts when a barrel gets bent on the track etc. Website is here
http://www.ccwheel.com/
http://www.ccwheel.com/