Exhaust done, just some wrapping left.
huge thanks to my buddies that are helping me.


https://cimg5.ibsrv.net/gimg/rennlis...9a8045f4a.jpeg
https://cimg7.ibsrv.net/gimg/rennlis...d788589f7.jpeg

Exhaust done.

https://cimg8.ibsrv.net/gimg/rennlis...2070605d4.jpeg

Geezus, that looks really amazing!!

Thanks, realy happy with it, crossover and downpipe is out in 10 minutes

New gearbox project in house, Audi s2 6speed.
will start on this after the car is done now for winter.
Hoping to dyno in October.
4.11 final ratio
1st 3.50
2nd 1.89
3rd 1.32
4th 1.03
5th 0.86
6th 0.71


https://cimg8.ibsrv.net/gimg/rennlis...df78936fd.jpeg

Keep us updated on that transmission. It's obviously a bit longer than stock, which shouldn't be a problem for cars with the spare tire well cut out. What about the rest of the case? pretty well bolt on?

It's a bit longer, but the bolt pattern is bolt on to the torque tube.

I need to fabricate some parts.
New driveshats
Gear link
Coupler gearbox - torquetube axle.

@Widerstandsfahig is working on a solution. Maybe you contact him. I'm pretty sure mine is already done. Not sure if you have the same trans though.

Question 1:

What did you do to make it a 10minute installation/removal verses the 2hour OEM? Was a 3 piece cross over used?

Question 2:
Will the new gear box let you reach 200mph?

Due to a big house renovation the 951 has not got the attention it deserves, when adding upp my no sleep over the oem ignition reading on the flywheel i was on the look for a solution.

DRS Development came up with an adapter wich includes an ATI damper ( good bye balanceshafts ) and a 60-2 trigger wheel.
Adding one camsensor, it`s now a solution my tuner likes.

Might be starting this thing before xmas..

https://cimg9.ibsrv.net/gimg/rennlis...c8c55dab4c.jpg

Why didn't you use just an "off the shelf Clewitt?
https://cimg3.ibsrv.net/gimg/rennlis...17c6a3b4c8.jpg

So om the waiting game for parts, i starten om refurbishing the ccw wheels.




https://cimg7.ibsrv.net/gimg/rennlis...ba594d028b.jpg
https://cimg0.ibsrv.net/gimg/rennlis...e439e29889.jpg

Sorry for late answer, we moved the exhaust tubes so they have greater clearing.
V-band inn and out of the turbo also helps alot.

It will in theory do 310 km/h on 6900 rpm.

https://cimg0.ibsrv.net/gimg/rennlis...11e00d7b20.jpg

https://cimg8.ibsrv.net/gimg/rennlis...b3c570671d.jpg