|
|
HOT SEX E!! Very nice. Rocking 4 point harnesses? I'd like those for daily driving.
|
Originally Posted by Noahs944
(Post 15309697)
HOT SEX E!! Very nice. Rocking 4 point harnesses? I'd like those for daily driving.
ill keep the 3 point also. |
Nice progress...., you must be getting close now..?
Curious, are you using the original balance shaft turbo lube feed...? I made a similar delete solution 15 years ago but I kept the oil feed groove on Ver. 1 using a cut section of a stock shaft for feed passage and a cross drilled hole on Ver. 2 on a lathed billet piece. On the fronts, I just used the 1st few inches chopped off a stock shaft with a spacer sleeve and bolt. Front only has to seal crankcase pressure since there's no oil delivered there once you interrupt feed from the bearing by cutting the shafts. Anyways...., carry on...:biggulp: T |
spoiler ordered from sportswagen Zürich https://cimg4.ibsrv.net/gimg/rennlis...01a8495a7.jpeg https://cimg3.ibsrv.net/gimg/rennlis...c870d57ca.jpeg |
I deleted my balance shafts also but tapped the oil feed holes & installed bolts.
I love that spoiler. Expensive I imagine. |
sorry for no update in a long time, got a headbolt issue when assembling the engine where one bolt got in a bad mood. This is now sorted, hoping to install the engine in april. just need to finish the house renovation project. Been working all days in 4 months. https://cimg2.ibsrv.net/gimg/rennlis...47c487973.jpeg https://cimg2.ibsrv.net/gimg/rennlis...27fe60dab.jpeg https://cimg4.ibsrv.net/gimg/rennlis...fdda1f259.jpeg |
Awesome man, nice to hear.
I was gonna search your name just a couple days ago to bump your old thread and ask why you hadn't updated. T |
Originally Posted by 951and944S
(Post 15700803)
Awesome man, nice to hear.
I was gonna search your name just a couple days ago to bump your old thread and ask why you hadn't updated. T Been some crazy last 6 months. Selling two appartments, buying the house, renovation madness! |
Originally Posted by ealoken
(Post 15700828)
Thanks :)
Been some crazy last 6 months. Selling two appartments, buying the house, renovation madness! Already bought everything I can buy ahead of time. When I pull the trigger, I suspect I'll disappear from here for while. Hey wait, this could be an opportunity...., anybody want to donate to speed up my absence....:roflmao: T |
What calipers are those? I need to buy a set for my build.
|
Originally Posted by Robert_325i
(Post 15714246)
What calipers are those? I need to buy a set for my build.
|
Originally Posted by ealoken
(Post 15720597)
996TT calipers and GT2 350mm disc :)
|
https://cimg5.ibsrv.net/gimg/rennlis...6d4c35cc6.jpeg
https://cimg2.ibsrv.net/gimg/rennlis...f5db78e3d.jpeg https://cimg3.ibsrv.net/gimg/rennlis...461b8f5c0.jpeg https://cimg8.ibsrv.net/gimg/rennlis...0700cd2df.jpeg https://cimg1.ibsrv.net/gimg/rennlis...bac593db7.jpeg The house project has been finished, so i finaly got to mount the new sparco seats and Schroth 4pt Harness. I also ordered a new wing from Holland :) |
Look BITCHEN brother. :rockon:The house & the car! Where's you'd get the wing from Holland? Those seat belts are what I wish I had instead of 6 points (for street). Also what lap belt mounts are you using & seat mounts are you using?
|
| All times are GMT -3. The time now is 12:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands