Notices
944 Turbo and Turbo-S Forum 1982-1991
Sponsored by:
Sponsored by: Clore Automotive

Tial Wastegates

Thread Tools
 
Search this Thread
 
Old 10-26-2003 | 06:25 PM
  #91  
Bii's Avatar
Bii
Advanced
 
Joined: Oct 2001
Posts: 96
Likes: 0
From: J.C.
Default

I f#@ked up!
Old 10-26-2003 | 06:44 PM
  #92  
NZ951's Avatar
NZ951
Race Director
 
Joined: Apr 2003
Posts: 13,778
Likes: 5
From: New Zealand massive
Default

So is there any disadvantage to having to construct a new crossover pipe, other than the fact that you have to, opposed to the 46mm and using stock pipes? The 38mm is surely large enough for most everyone.
Old 11-02-2003 | 01:34 PM
  #93  
Blueman33's Avatar
Blueman33
Pro
 
Joined: May 2003
Posts: 746
Likes: 0
From: New Orleans
Default

Is a 40mm Tial WG a bolt-on for our cars?
Old 11-02-2003 | 01:38 PM
  #94  
Matt H's Avatar
Matt H
Race Director
 
Joined: Jul 2003
Posts: 15,712
Likes: 3
Default

No Tial is a bolt on without adapter plates. AFAIK. I am ordering my new Tial tomorrow.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Old 11-03-2003 | 10:42 AM
  #95  
Blueman33's Avatar
Blueman33
Pro
 
Joined: May 2003
Posts: 746
Likes: 0
From: New Orleans
Default

My question about Tial 40mm more precisely. If i order the Tial 40mm will it have the appropriate adapter plates in the kit, or will they have to be especially made like for the smaller Tial.

the 40mm has the four hole design like the 46mm, not the two hole design like the 35, 38.

The kit is $350 with flanges.
http://www.roadraceengineering.com/tial.htm

WILL THIS WG FIT WITH THIS KIT?

Thanks for input
Old 11-03-2003 | 10:55 AM
  #96  
Matt H's Avatar
Matt H
Race Director
 
Joined: Jul 2003
Posts: 15,712
Likes: 3
Default

Why not call them? I am almost sure the answer is no it wont. The plates that come with it will have to be welded in place. You can get the 35 (38 I cant remember which) with plates from SFR for like 300 bucks.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Old 11-03-2003 | 12:41 PM
  #97  
Blueman33's Avatar
Blueman33
Pro
 
Joined: May 2003
Posts: 746
Likes: 0
From: New Orleans
Default

I wrote them. Response was

The foot print looks much the same , But i would need a 944 gasket to double check.

I don't have a gasket, so I thought maybe someone had installed the 46mm, which has the same footprint.



Quick Reply: Tial Wastegates



All times are GMT -3. The time now is 07:02 PM.