Haltech Tune Help 3.0L 16v
#46
Rennlist Member
Patrick,
We are targeting to be less than 2100 lbs w/5 gallons of fuel.
The splitter, belly pans and diffusor will be in gloss Carbon Fiber.
We are thinking about keeping the Roof skin in Gloss CF
The exterior is going to be a semi gloss black.
We are using 997 cup rear calipers and GT2 front calipers.
With weight in mind we have 355mm stoptech front floating rotors and not sure but I think we may use 330 MM in leui of 350MM floater on the rear.
Max
We are targeting to be less than 2100 lbs w/5 gallons of fuel.
The splitter, belly pans and diffusor will be in gloss Carbon Fiber.
We are thinking about keeping the Roof skin in Gloss CF
The exterior is going to be a semi gloss black.
We are using 997 cup rear calipers and GT2 front calipers.
With weight in mind we have 355mm stoptech front floating rotors and not sure but I think we may use 330 MM in leui of 350MM floater on the rear.
Max
#47
Instructor
Haltech tune
#48
Addict
Rennlist Member
Rennlist Member
Give me your email and I'll send it your way.
If I ever come down below I expect one Fosters in return.
If I ever come down below I expect one Fosters in return.
#50
Rennlist Member
#51
Intermediate
Patrick, you can, but I think it's only for visiting Americans since you have to go to someone huge like Dan's to get it. It's certainly not available at our local bottelo or supermarkets.
#53
Intermediate
I wouldn't touch it myself, I was surprised to see it on their site.
It looks like they have just remade it "classic taste of Australia is back with a new brew"
It looks like they have just remade it "classic taste of Australia is back with a new brew"