Wheels ID
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Wheels ID
Anybody know this wheels
#5
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
For early offset 86
#7
Rennlist Member
+1
The lug bolt holes being offset from the center of the hole is generally indicative of replica wheels. Plus those very small pin holes in between each lug hole... what's the deal with those?
The DP center cap is probably just a center cap or sticker.
But really the only true way to tell is to pull the wheel off and check for stampings in the back of the wheel.
The lug bolt holes being offset from the center of the hole is generally indicative of replica wheels. Plus those very small pin holes in between each lug hole... what's the deal with those?
The DP center cap is probably just a center cap or sticker.
But really the only true way to tell is to pull the wheel off and check for stampings in the back of the wheel.
Trending Topics
#8
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Why don't you two geniuses enlighten me with the anchor's specs width offset Weight etc, who made then and when?
#9
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Are these replicas too?
#13
Freedom Enthusiast
Rennlist Member
Rennlist Member
DP motorsports 935.
http://petergz.smugmug.com/Cars/Pors...qXHTG&lb=1&s=A
I wonder if these are from the same company or are a knockoff?
http://petergz.smugmug.com/Cars/Pors...qXHTG&lb=1&s=A
I wonder if these are from the same company or are a knockoff?
#14
These are DP endure, only 50 sets ever made,use WORKS barrels and are true 3pc wheels.They also went on the BMW Dinan shark and look like super cups. The rims are über rare today and where manufactured in the mid 90's with others like OZ Moto,Speedlnes and OZ Futuros. I have these same rims from Luis because I know what I am looking at unlike some of you guys.
#15
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
There you go
These are DP endure, only 50 sets ever made,use WORKS barrels and are true 3pc wheels.They also went on the BMW Dinan shark and look like super cups. The rims are über rare today and where manufactured in the mid 90's with others like OZ Moto,Speedlnes and OZ Futuros. I have these same rims from Luis because I know what I am looking at unlike some of you guys.