3 or 5 wire TPS that will fit porsche throttle shaft?
#17
Race Car
Thread Starter
Join Date: Mar 2012
Location: Austin TX, drinking beer in the garage
Posts: 3,602
Likes: 0
Received 7 Likes
on
7 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
For anyone interested and just for future archival knowledge, the Bosch part number is 0280120431 and the part can be found on:
94-97 Audi A4
94-97 Audi A6
91-94 Audi 100
91-96 Audi 80
These are all with the 2.8 liter SOHC 12v V6. It is a direct fit to a 951 and may even work with the stock DME.
Thanks for the tip to get me searching Raceboy.
94-97 Audi A4
94-97 Audi A6
91-94 Audi 100
91-96 Audi 80
These are all with the 2.8 liter SOHC 12v V6. It is a direct fit to a 951 and may even work with the stock DME.
Thanks for the tip to get me searching Raceboy.
#18
Race Car
Thread Starter
Join Date: Mar 2012
Location: Austin TX, drinking beer in the garage
Posts: 3,602
Likes: 0
Received 7 Likes
on
7 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Also just for everyone's knowledge, in addition to the 84-91 BMW 3, 5, and some 7 series using the same Crank position sensors as our cars, the same sensor is also available on the same cars mentioned in my previous post with the 2.8 liter sohc v6.
#21
#23
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Not sure about that. This setup is on RAGE2's old car I bought from Soloracer. Apartently it was running an SDS engine management system....I'm not familiar with it.
I pulled the thing apart a few weeks ago right around the time you posted.
mechanically it funtions properly....not experienced on this particular TPS as far as wiring operation.
hopefully someone on here may have an idea
I pulled the thing apart a few weeks ago right around the time you posted.
mechanically it funtions properly....not experienced on this particular TPS as far as wiring operation.
hopefully someone on here may have an idea