Aero for the track guys... a basic resource.
#3
Rennlist Member
In a nutshell.
#4
Rennlist Member
I like this page too. I found it when I started to look for the different aero tools for my car.
Pretty decent site for basic fundamentals.
Are you considering different aero tools?
I am very interested about the different aero options for our cars. Do not hesitate to share.
I will receive my wing and build my splitter next week.
Pretty decent site for basic fundamentals.
Are you considering different aero tools?
I am very interested about the different aero options for our cars. Do not hesitate to share.
I will receive my wing and build my splitter next week.
#6
Burning Brakes
Our cars have some low hanging fruit, aerodynamically: Not bad from the factory for its day, but could still stand some improvement: Undertray, wheel spats, diffuser, better nose design, elimination of pop-up headlights, better mirrors, better engine bay cooling flow, etc.
#7
Rennlist Member
There's a ton of stuff that can be done but it also depends on what rules you have to comply with. If you have the opportunity to work with an Aerodynamicist it's well worth it imho. We have made pretty big inroads via some mostly simple changes. Some not so simple but it's up to you and the rules as to how far you can go.
Trending Topics
#9
Has anybody consider cutting out a portion of the firewall/bulkhead metal between the engine compartment and the area where the HVAC fan area is? would it allow air to flow better out of the intercooler past the engine, and into to low pressure area at the bottom of the windshield. I am in no way an aerodynamic expert, but it makes sense to me. If it is a bad idea, why?
#10
Rennlist Member
Has anybody consider cutting out a portion of the firewall/bulkhead metal between the engine compartment and the area where the HVAC fan area is? would it allow air to flow better out of the intercooler past the engine, and into to low pressure area at the bottom of the windshield. I am in no way an aerodynamic expert, but it makes sense to me. If it is a bad idea, why?
#11
Has anybody consider cutting out a portion of the firewall/bulkhead metal between the engine compartment and the area where the HVAC fan area is? would it allow air to flow better out of the intercooler past the engine, and into to low pressure area at the bottom of the windshield. I am in no way an aerodynamic expert, but it makes sense to me. If it is a bad idea, why?
I don't like how the intercooler has no proper extraction either.
#12
Rennlist Member
Venting the hood makes more sense. If done properly.
#13
Burning Brakes
A hood vent is a great idea since it allows more air to go over the car where the bodywork is more slippery, rather that having the air from the fmic flow under the car where there's more turbulence. It would also reduce lift. It should be placed slightly behind the top of the radiator where the curve of the hood begins to flatten out, and it would help to have a small lip on the front edge of the vent to help kick the air up.
Here's another good source for aero info. It's a little more in depth but it's well written. Check out all 5 parts. http://www.autospeed.com/cms/article.html?&A=108656
Here's another good source for aero info. It's a little more in depth but it's well written. Check out all 5 parts. http://www.autospeed.com/cms/article.html?&A=108656
#15
Rennlist Member
Has anybody consider cutting out a portion of the firewall/bulkhead metal between the engine compartment and the area where the HVAC fan area is? would it allow air to flow better out of the intercooler past the engine, and into to low pressure area at the bottom of the windshield. I am in no way an aerodynamic expert, but it makes sense to me. If it is a bad idea, why?
What I know is that I have a lot of turbulence in this area. The rear section of my my FG hood is moving a lot a high speed. I can see it from the cockpit.
I may have too much air coming from my front bumper and trying to find an exit.
In term of aero, I am still questioning about this big gap between the hood and the windshield. I have no battery and ventilation unit, just the wiper system and the fuse box. This big opening with an empty space may create some turbulence too.
I also saw few cars with a spoiler or deflector at the end of the hood.
On race cars, do you guys close this opening? (between the hood and the windshield)
Or do you open the the engine bay as alpinewhite951 mentioned?