Front suspension upgrade for Porsche 944/968
12-09-2021 | 09:16 AM
#107
Instructor
Joined: Dec 2014
Posts: 118
Likes: 3
From: Toowoomba Australia
Hi Michael
Sorry to revive an old thread, but that factory solution looks like the ultimate fix for this issue. You have seen this car, or maybe its yours? It looks like they fabricated a custom crossmember? I wonder was there much modification of the rear castor block mount to move it like that? Also maybe the wishbone itself is a special part, longer than stock? If you had any info I would be very grateful.
Sorry to revive an old thread, but that factory solution looks like the ultimate fix for this issue. You have seen this car, or maybe its yours? It looks like they fabricated a custom crossmember? I wonder was there much modification of the rear castor block mount to move it like that? Also maybe the wishbone itself is a special part, longer than stock? If you had any info I would be very grateful.
04-15-2022 | 09:53 AM
#108
Rainman
Rennlist Member
Rennlist Member
Joined: Jan 2007
Posts: 45,599
Likes: 670
From: Nashville, TN
@mikey_audiogeek did this project ever complete or did it go back to the idea shelf?
i've got a similar quest in mind but with different parts...and the measurements are suspiciously close enough to maybe just work.
i've got a similar quest in mind but with different parts...and the measurements are suspiciously close enough to maybe just work.
The following 2 users liked this post by PegasusVoss:
alengyel (11-21-2023),
fasterfaster (12-25-2023)
01-16-2024 | 08:38 AM
#110
Rainman
Rennlist Member
Rennlist Member
Joined: Jan 2007
Posts: 45,599
Likes: 670
From: Nashville, TN
The following 2 users liked this post by Penguinracer:
Jay Wellwood (01-16-2024),
spencang (01-17-2024)
