Refresh951's Hybrid Ultra Stroker Build
03-11-2015, 09:22 PM
#1654
Rennlist Member
Nice work Shawn !
Looking real sweet in there
Best regards
Ed
Looking real sweet in there
Best regards
Ed
03-11-2015, 11:37 PM
#1656
Rennlist Member
Thread Starter
03-11-2015, 11:57 PM
#1657
Rennlist Member
Thread Starter
Head is a new self ported 8V head I worked on over the Winter. Head uses 47 mm intake valves and Datsun valve springs that can handle the extra lift. I plan on posting a detailed thread about the head within a few days.
Cam is a CEP cam that I think is pretty close to a JME B13/8SR-14 (see below). Bought it from Spoolin51. It has a .525" intake lift and a .500 exhaust lift. Tried to get details from Dave McGrath but never heard back from him. It uses smaller base circles and lash caps.
B13/8SR-14 944 2V Best power band 4200-7200 rpm. 1000 rpm idle. .537 IN cam lift & .502 EX. Modified intake hydraulic lifters required and longer intake valve stems or lash caps may be required depending on tip height. Race valve spring & retainer package required. Motronic will not work. Bhp available depends upon tune of engine. No equivalent competitors cam. Used where lift is un-restricted but racing cam is allowed. Power up to 625 bhp.
Cam is a CEP cam that I think is pretty close to a JME B13/8SR-14 (see below). Bought it from Spoolin51. It has a .525" intake lift and a .500 exhaust lift. Tried to get details from Dave McGrath but never heard back from him. It uses smaller base circles and lash caps.
B13/8SR-14 944 2V Best power band 4200-7200 rpm. 1000 rpm idle. .537 IN cam lift & .502 EX. Modified intake hydraulic lifters required and longer intake valve stems or lash caps may be required depending on tip height. Race valve spring & retainer package required. Motronic will not work. Bhp available depends upon tune of engine. No equivalent competitors cam. Used where lift is un-restricted but racing cam is allowed. Power up to 625 bhp.
03-12-2015, 12:03 AM
#1659
Rennlist Member
Sounds very much like my old Cam Shawn. I might have some more details on that somewhere for you.
03-13-2015, 06:56 PM
#1660
Rennlist Member
Thread Starter
03-13-2015, 07:20 PM
#1664
Rennlist Member
Thread Starter
03-13-2015, 10:52 PM
#1665
Professional Hoon
Rennlist Member
Rennlist Member
Join Date: Jan 2010
Location: Melbourne, Australia
Posts: 7,090
Likes: 0
Received 4 Likes
on
4 Posts
What RPM is your idle? sounds good!
I wish i knew the specs of mine, mine sounds more wild. Dave never hands out his specs. All i got was "it's similar to waqqas's (now yours) cam"
all i got was
did you get custom lifters made up?
Where would one be able to get just the aluminium MAF pipe only? i guess it would require a retune?
I wish i knew the specs of mine, mine sounds more wild. Dave never hands out his specs. All i got was "it's similar to waqqas's (now yours) cam"
all i got was
did you get custom lifters made up?
Where would one be able to get just the aluminium MAF pipe only? i guess it would require a retune?