TonyG > New Race Car Build Thread
02-20-2013, 12:54 AM
#451
Rennlist Junkie Forever
Thread Starter
02-20-2013, 02:12 AM
#452
Rennlist Member
Still curious if the canards will work with that nose piece...and how similar a contour that nose is to their other nose piece. That is, would like some myself on the proviso that they fit. Probably need adapting and that might be difficult.
Tony, how much of your suspension setup would fit a 951?
Tony, how much of your suspension setup would fit a 951?
02-20-2013, 09:04 AM
#453
Rennlist Member
Good lord that puppy is wiiiiiiide.
Are you able to mount a diffuser in the back? Since Tim is doing the custom exhaust with, now would be the time....
Great to see it on the ground.
Are you able to mount a diffuser in the back? Since Tim is doing the custom exhaust with, now would be the time....
Great to see it on the ground.
02-20-2013, 09:52 AM
#455
Burning Brakes
She's a beaut. I would love to have the time and funds to attempt building a race car...
How come you are allowed to have the two attachment points for the rear body work sticking out like that? They look like terrifying spikes that would potentially impale another driver if hit at the right angle in a crash
How come you are allowed to have the two attachment points for the rear body work sticking out like that? They look like terrifying spikes that would potentially impale another driver if hit at the right angle in a crash
Last edited by bebbetufs; 02-20-2013 at 11:56 AM.
03-09-2013, 01:12 PM
#457
Rennlist Junkie Forever
Thread Starter
It's at Speed Force Racing in San Diego. It took us a couple of weeks to get all the materials to build the headers and exhaust.
They are also plumbing up the engine and trans oil cooler systems as well as the trans oil cooler plenums and ducting.
It will be there another couple of weeks, but I'll post some progress pics along the way.
TonyG
They are also plumbing up the engine and trans oil cooler systems as well as the trans oil cooler plenums and ducting.
It will be there another couple of weeks, but I'll post some progress pics along the way.
TonyG
03-09-2013, 04:24 PM
#458
Addict
Rennlist Member
Rennlist Member
It's at Speed Force Racing in San Diego. It took us a couple of weeks to get all the materials to build the headers and exhaust.
They are also plumbing up the engine and trans oil cooler systems as well as the trans oil cooler plenums and ducting.
It will be there another couple of weeks, but I'll post some progress pics along the way.
TonyG
They are also plumbing up the engine and trans oil cooler systems as well as the trans oil cooler plenums and ducting.
It will be there another couple of weeks, but I'll post some progress pics along the way.
TonyG
03-09-2013, 04:27 PM
#459
Rennlist Member
So what ABS are you going with now?
03-09-2013, 06:50 PM
#460
Rennlist Junkie Forever
Thread Starter
03-09-2013, 06:51 PM
#461
Rennlist Junkie Forever
Thread Starter
03-09-2013, 07:26 PM
#462
Rennlist Member
Email sent to Archsoft address.
03-09-2013, 08:42 PM
#465
Rennlist Member
Is the Teves the standard BMW one Rod?