WTB > Drivers side door handle and locking mechanism
#1
Rennlist Junkie Forever
Thread Starter
WTB > Drivers side door handle and locking mechanism
WTB
Drivers door handle and complete locking mechanism.
Mine broke. I can't open the door from the outside. Not sure what piece is broken since I'm not familiar with it so I'm looking to buy the whole thing :-)
If you have one please pm me with cost shipped to 91321.
Thanks,
TonyG
Drivers door handle and complete locking mechanism.
Mine broke. I can't open the door from the outside. Not sure what piece is broken since I'm not familiar with it so I'm looking to buy the whole thing :-)
If you have one please pm me with cost shipped to 91321.
Thanks,
TonyG
#2
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
WTB
Drivers door handle and complete locking mechanism.
Mine broke. I can't open the door from the outside. Not sure what piece is broken since I'm not familiar with it so I'm looking to buy the whole thing :-)
If you have one please pm me with cost shipped to 91321.
Thanks,
TonyG
Drivers door handle and complete locking mechanism.
Mine broke. I can't open the door from the outside. Not sure what piece is broken since I'm not familiar with it so I'm looking to buy the whole thing :-)
If you have one please pm me with cost shipped to 91321.
Thanks,
TonyG
#3
Usually the finger portion breaks inside ( metal fatigue) If the handle feels easy to pull or the good old rod breaks at the top near the eye hole . If you still need one pm me .
#4
Rennlist Junkie Forever
Thread Starter
TonyG
#5
Rennlist Member
You need to take off the plastic access panel on the trailing edge of the door and look up in there with a flashlight.
It's possible one of the linkages either popped off or broke. Those are cheap and fairly easy to replace.
It's possible one of the linkages either popped off or broke. Those are cheap and fairly easy to replace.
Trending Topics
#8
Burning Brakes
Join Date: May 2004
Location: Minneapolis, MN
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
I need a passenger handle if anyone has one. My lever snapped...door is currently hard to open close. You really have to give it a push to get it to close which isn't awful but you really have to squeeze the handle hard to open the door thus the reason it snapped.
(Just had door off for paint, I can't seem to get it to open easier..any tips?)
(Just had door off for paint, I can't seem to get it to open easier..any tips?)
#10
Burning Brakes
Join Date: May 2004
Location: Minneapolis, MN
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
Well I do know it has to do with the alignment of the door. It is aligned just how I want it as far as the panel is concerned but there might be slight binding towards the front of the door. That or the striker needs adjusting but I've looked and as far as I can tell it seems fine. My body guy and I looked at it for a while so I may have to get another professional opinion.
#14
944 door handle Dp951
I need a passenger handle if anyone has one. My lever snapped...door is currently hard to open close. You really have to give it a push to get it to close which isn't awful but you really have to squeeze the handle hard to open the door thus the reason it snapped.
(Just had door off for paint, I can't seem to get it to open easier..any tips?)
(Just had door off for paint, I can't seem to get it to open easier..any tips?)
Last edited by dp951; 05-11-2012 at 10:35 PM.