Warren's Build (Look what came in the mail)
#46
Rennlist Member
It is under the passenger side intercooler pipe, right on top of the water neck. Do yourself a favor and run to AutoZone and borrow a coolant pressurizer. IMO it is a must to get all the air out.
#47
Instructor
Thread Starter
Water neck?
I think it would be this bolt their. Let me know if I'm correct. That seems logical but knowing Porsche designers..it could be anyone.
Thanks man
Thanks man
#49
Instructor
Thread Starter
ohhh I see... actually on the water neck..that makes sense. Almost ready to go!
(I have since moved the fuel pressure gauge to the other side)
Thanks guys.
(I have since moved the fuel pressure gauge to the other side)
Thanks guys.
#50
Instructor
Thread Starter
Does anyone know who made the stock suspension on the 1988 turbo's. I have bilstein but I'm trying to figure out if their original. I check out clarks garage and he skipped over that part. any info or help is appreciated.
#56
Instructor
Thread Starter
I'll get some pics later this week. Not driving...waiting on 3" coupler off the turbo should be here tomorrow. I do have a couple of questions, I'm going to pull the plugs, DME relay, and turn it over a couple times before I start it up.
Questions; How long should i let it idle for before I shut it down? Also I plan on gradually upping the boost starting at about 10-12-14 etc. Does that sound about right? I guess the main question is how long should I let it idle before I start driving it around? Thanks guys. Also..stay tuned..I installed water/meth. and I'm going to end the discussion once and for all about how much power it throws down on my car.
Questions; How long should i let it idle for before I shut it down? Also I plan on gradually upping the boost starting at about 10-12-14 etc. Does that sound about right? I guess the main question is how long should I let it idle before I start driving it around? Thanks guys. Also..stay tuned..I installed water/meth. and I'm going to end the discussion once and for all about how much power it throws down on my car.
#57
Professional Hoon
Rennlist Member
Rennlist Member
Join Date: Jan 2010
Location: Melbourne, Australia
Posts: 7,090
Likes: 0
Received 4 Likes
on
4 Posts
i just let mine warm up and drove it up and down my street softly because i had stale (6 month old) fuel in it. then i put 98ron in it and kept it on 7psi for a bit then boosted it
#58
Instructor
Thread Starter
This picture shows were they go. Were did the line to the waste gate disappear to?
http://www.lindseyracing.com/pics/va...ntake%20wg.gif
http://www.lindseyracing.com/pics/va...ntake%20wg.gif
#59
Instructor
Thread Starter
edit: here is the pic with the empty numb..where does this go. I don't think it's had anything on it since I bought the car. I run a duel port tial wastegate with one line going in the side and the top open.