Is anyone alive out there ?? What happened to this board ?
#46
Rennlist Member
He is only acting like a dick in response to another individual (do a little search yourself and see how helpful he ever really is...). You sir are also a acting like a dick. Take it elsewhere if what you have to say is irrelevant. Your idiotic response in this thread is unwanted.
Ed, feel free to PM or call me with questions if you don't feel like puttng up with petty bull****. You have my number.
Ed, feel free to PM or call me with questions if you don't feel like puttng up with petty bull****. You have my number.
BTW any of you guys going to Hershey?
#47
Rennlist Member
Thread Starter
GFY ...
Got a problem come visit me ....
I doubt you will ....
Otherwise stick you head up your *** and roll down a hill
Get a life punk
Pretty Bird ?... sounds kinda Girlie if you ask me ....
#49
Drifting
Join Date: May 2008
Location: Virginia Beach, VA
Posts: 2,080
Likes: 0
Received 15 Likes
on
11 Posts
Thanks Curt
I was wondering if that 90 degree at the top was going to pose a problem?
Actually I bought the Parker socketless hose for this, but was going to reserve it for the top connection, where it connects to the boost line, on the 3 headed monster
Thanks for that tip
Regards
Ed
I was wondering if that 90 degree at the top was going to pose a problem?
Actually I bought the Parker socketless hose for this, but was going to reserve it for the top connection, where it connects to the boost line, on the 3 headed monster
Thanks for that tip
Regards
Ed
I know you're a stickler for details and noticed you have brass fittings on your waste gate. I believe McMaster has them in stainless. Aluminum ones are available from various vendors too (Aeroquip, Earl's, ect).
#50
Hi Eddie - go easy on my boy Reno....he's angry because he has to remove the front of his new car to change the timing belt.
This takes a long time....and Spanish boys are short on patience.
This takes a long time....and Spanish boys are short on patience.
#51
I still am wondering why anyone on the East coast would answer a post at 1:07 AM in the morning on a weekday. I guess I am the only one who has set an alarm that goes off early in the morning to go to work. Must be a question for the West coast folks.
#52
Rennlist Member
I think the reality is that Ed is one of the very very few original owners on this board and, as a result of that and his OCD, is looking for a higher level of detail than just about everyone else. When Ed asks what kind of bolt goes into a certain hole, there is no point in telling him to search. It's annoying and not helpful to him. He is not asking for the size, which has been posted a hundred times -- he's asking who manufactured it and how it was finished from the factory. (Think I'm kidding?) When he asks about wastegate brackets, he's not asking how to install a wastegate -- he can do that -- he's asking about the specific factory part variations that he's seen so he can adopt the most appropriate factory approach. Some folks seem to get all that, and others clearly don't.
#53
Rennlist Member
Ed sometimes forgets that the regular humans have to sleep.
#56
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
#57
What do you think LA crip?
#58
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Proven Fact
http://jalopnik.com/#!5680757/mythbu...ics-in-reverse