where to buy intercooler pipes
06-21-2002, 10:50 PM
#31
We need to add this tool to the Rennlist tool club.
Beading the Ends of an I/C pipe
<a href="http://www.roadraceengineering.com/eclipsetech/icpipebead.htm" target="_blank">Bead form tool</a>
Beading the Ends of an I/C pipe
<a href="http://www.roadraceengineering.com/eclipsetech/icpipebead.htm" target="_blank">Bead form tool</a>
06-22-2002, 04:13 AM
#32
I used stainless t-bar clamps on my setup, I like them very much, BUT I was able to find them locally at a supply house, Whisler Bearing, for less than $3 a piece. I forget the maker.
~C
~C
06-23-2002, 01:39 PM
#33
Banned
Join Date: Jun 2001
Location: San Diego
Posts: 1,635
Likes: 0
Received 0 Likes
on
0 Posts
We also have them in aluminum. I have some new pictures ofthem but have no way to upload them to this forum.Bummer
Tim, are these the pipes?
Yes.These are our newest pipes.If you look real close you can see the grooves cut into the pipes at each end on all the little fittings.
Tim, are these the pipes?
Yes.These are our newest pipes.If you look real close you can see the grooves cut into the pipes at each end on all the little fittings.
06-30-2002, 05:18 AM
#35
Racer
Join Date: Jan 2002
Location: San Diego, CA
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
Here are the Huntley Pipes (The originals and still the best), they incorporate a reducer in Stainless Steel to the throttle body. They are 2.25" because that is what the intercooler is and any larger would simply cause a pressure drop. Our pipes are cut with teeth which bite into the hose to keep them in place. All hoses and reducers as well as Stainless Steel clamps are included.
07-01-2002, 11:33 AM
#37
Drifting
Join Date: Dec 2001
Location: St. Louis
Posts: 2,058
Likes: 0
Received 0 Likes
on
0 Posts
I, personally, am thankful for any illumination or input from the professionals. While I might think I have a grasp on the mechanical and technical issues relating to our cars, it's hardly a substitute for someone's input who can detail a complex mechanical procedure purely from the collective memories of a thousand versions of that procedure. I for one welcome any input that SFR/Huntley/Anderson/Lindsay/Paragon/et al want to provide. Thank you very much! <img src="graemlins/beerchug.gif" border="0" alt="[cheers]" />
07-01-2002, 12:24 PM
#38
Pro
Join Date: Aug 2001
Location: Harrisonburg, VA
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Yes Russ, but SMALLER pics would be nice, as Luke is right, I can't read the text anymore (scroll left, scroll right, scroll left, scroll right scroll scroll scroll). Smaller pics are nicer for people on modem (like me at home), or who check forums at work and don't want a FULL SCREEN SHOT of some pipes blowing their cover of work related surfing.
07-01-2002, 04:55 PM
#39
Nordschleife Master
and the details that set their pipes from the others should be better displayed on their site, NOt of a forum everytime somebody says........ " intercooler pipes" 
07-01-2002, 04:58 PM
#40
Nordschleife Master
[quote]Originally posted by Russ Murphy:
<strong>/Lindsay/.... to provide. Thank you very much! <img src="graemlins/beerchug.gif" border="0" alt="[cheers]" /> </strong><hr></blockquote>
I would like to hear more from Lindsey. I see little attacks on their products from time to time from other companies, and they aren't around to defend themselves. their replies are usually more text orriented and actually HELP somebody with a problem or explain something as opposed to free advertising
<strong>/Lindsay/.... to provide. Thank you very much! <img src="graemlins/beerchug.gif" border="0" alt="[cheers]" /> </strong><hr></blockquote>
I would like to hear more from Lindsey. I see little attacks on their products from time to time from other companies, and they aren't around to defend themselves. their replies are usually more text orriented and actually HELP somebody with a problem or explain something as opposed to free advertising
