Hello
I think $400 are to much just for some pipes. (even if they are polished)
The guy that was recomended here on this board is way to expensive for me and If I wanted to spend so much money I would buy them from Tim@ speedrforce. It is cheaper and I know that the quality is good.

So anyone knows where to buy these two pipes for cheap?

Konstantin

 

well, first of all, why replace the stockers? (well at least , why replace the one that leads to the T body?)

 

I will bore out the throttle body and a slightly bigger pipe wouldn't hurt.

Konstantin

 

<a href="http://home.fuse.net/Porsche951/icpipes.htm" target="_blank">Sean Eviston IC Pipes. </a>

 

the intercooler is 2.25.............

 

[quote]Originally posted by perry951:
<strong><a href="http://home.fuse.net/Porsche951/icpipes.htm" target="_blank">Sean Eviston IC Pipes. </a></strong><hr></blockquote>

he wants $400!!!!!!!!!

No thanks.

Konstantin

 

Luke, do you still remember your stock IC pipes?

It looks like Porsche decided to start beating them with a hammer.

 

Konstatin,

You can get them from us for $350 and they comes with all the appropriate silicone reducers, hoses and clamps. I also have to admit that are pipes drop the bomb on the "other shops" pipes. There is alot of hard work that goes into SFR intercooler pipes and they dont blow off when you hit the boost hard;^) We also have them in aluminum. I have some new pictures of them but have no way to upload them to this forum.Bummer.


Tim
86 951
<a href="http://www.speedforceracing.com" target="_blank">http://www.speedforceracing.com</a>

 

He must have raised the price from when I got them. IMHO, they are worth it. They really are nice pipes.

Tim is sending me a MAF inlet, so I'll report then.

 

I got last time a MAF pipe from Tim at SFR. It was worth the money not as expensive as HR and very good quality.

I would always check with him before I buy something.

Konstantin.

 

Sean wants $400 now!!!! OMG! I hope he is selling them with hose clamps and connectors then .

 

[quote] Sean wants $400 now!!!! OMG! I hope he is selling them with hose clamps and connectors then <hr></blockquote>

Seriously!

 

i bought my intercooler pipe from tim @ SFR 3 years back and it was mint, perfect fit, great look, no rust after 3 years and looks new still, thanks tim

 

We also have them in aluminum. I have some new pictures of them but have no way to upload them to this forum.Bummer

Tim, are these the pipes? Why does the Al cost more then the SS?

On edit, Tim sent me these pictures.
<a href="http://boards.rennlist.com/upload/stockpipes001.jpg" target="_blank">Stock Pipes</a>
<a href="http://boards.rennlist.com/upload/greddypipes.jpg" target="_blank">Greddy pipes</a>
<a href="http://boards.rennlist.com/upload/stevem001.jpg" target="_blank">Installed pipes</a>

 

I got mine from TTim too, I do wish I had opted for aluminum though.......