Notices
944 Turbo and Turbo-S Forum 1982-1991
Sponsored by:
Sponsored by: Clore Automotive

So what little projects are you guys doing in the offseason?

Thread Tools
 
Search this Thread
 
Old 11-27-2010, 06:08 PM
  #1  
docwyte
Rennlist Member
Thread Starter
 
docwyte's Avatar
 
Join Date: Nov 2004
Location: denver, co
Posts: 7,515
Received 522 Likes on 350 Posts
Default So what little projects are you guys doing in the offseason?

Here's what I'm doing to the LS1 951...

#1 Install a Tilton adjustable brake proportioning valve.

#2 Install Rennline pedal covers and gas pedal height extension

#3 Get the car re tuned using Tony G's mapping as a base

#4 Install and wire in the proper tow hitch harness


Have to do #1 as my hydroboosted brake master cylinder is sending too much braking power to the rear.

Doing #2 as the brake pedal doesn't travel as far down as it used to and I can't heel/toe the way it is. Gas pedal is too low, so hopefully this will solve it.

#3 to hopefully gain another 30rwhp. Otherwise I have a set of CNC ported LS6 heads I can install, but I really hope I don't have to, as it'll be a lot of wrenching to install them.

#4 because I bought the wrong damn harness, I need one for seperate brake/parking lights...

How bout you guys?
Old 11-27-2010, 06:13 PM
  #2  
piperporsche180944
Burning Brakes
 
piperporsche180944's Avatar
 
Join Date: Dec 2009
Location: Michigan
Posts: 1,062
Likes: 0
Received 0 Likes on 0 Posts
Default

Keep us updated! Sounds like a good time!

My goal is to go from 350rwhp@18lbs out of the 61-1 to 400-420rwhp running 20+lbs mildly safely...

Also my winter car (1985.5. 944 NA) will be getting a 50-100 dry shot of nos this spring
Old 11-27-2010, 06:57 PM
  #3  
DanaT
Three Wheelin'
 
DanaT's Avatar
 
Join Date: Jan 2002
Posts: 1,258
Likes: 0
Received 0 Likes on 0 Posts
Default

Need to hook uo the knock sensor....just gotta have fin unwrapping all the electrical tape from the harness and splice into #15. Would have been easier to do it before.


Should also find some sticky tires.

-Dana
Old 11-27-2010, 07:03 PM
  #4  
JohnKoaWood
Nordschleife Master
 
JohnKoaWood's Avatar
 
Join Date: Dec 2007
Location: Fly Away
Posts: 7,759
Likes: 0
Received 1 Like on 1 Post
Default

Hopefully getting the car together for a Hershey Debut... but may end up having to put it off till Fest '11.. time will tell..
Old 11-27-2010, 08:06 PM
  #5  
docwyte
Rennlist Member
Thread Starter
 
docwyte's Avatar
 
Join Date: Nov 2004
Location: denver, co
Posts: 7,515
Received 522 Likes on 350 Posts
Default

Damn, you can make over 400rwhp out of a stock 2.5l and a 61-1?
Old 11-27-2010, 08:13 PM
  #6  
bimmen325
Racer
 
bimmen325's Avatar
 
Join Date: Sep 2010
Location: Odessa,Texas
Posts: 318
Likes: 0
Received 0 Likes on 0 Posts
Default

I need to get everything installed 3" exhaust, Maf, 55 injectors, rebuilt k27/6, tial 38w/g. Then hopefully i will just have the manual steering swap to wrap-up.
Old 11-27-2010, 08:21 PM
  #7  
racerxrick
Rennlist Member
 
racerxrick's Avatar
 
Join Date: Jun 2010
Location: Dallas, TX
Posts: 2,529
Likes: 0
Received 0 Likes on 0 Posts
Default

what off season?
Old 11-27-2010, 08:21 PM
  #8  
Dougs951
Rennlist Member
 
Dougs951's Avatar
 
Join Date: Jul 2008
Location: Southern MD
Posts: 3,792
Likes: 0
Received 4 Likes on 4 Posts
Default

Hopefully I will get a euro bumper and paint it along with my manual roof.

I am also looking at doing some suspension work.
Old 11-27-2010, 08:24 PM
  #9  
hp18racer
Rennlist Member
 
hp18racer's Avatar
 
Join Date: Apr 2006
Posts: 868
Received 7 Likes on 4 Posts
Default

Chumpcar - Fix oil leak (rear balance shaft seal on passenger's side) and lower it
Green Car - Replace speedo cable, fix window switches and get heater controls to work
G Machine - Fix blower to work at more than just speed '4'
Race Car - Repair clutch and whatever is causing motor to miss fire
Old 11-27-2010, 08:35 PM
  #10  
m73m95
Nordschleife Master
 
m73m95's Avatar
 
Join Date: Dec 2007
Location: Las Vegas, NV
Posts: 7,100
Likes: 0
Received 7 Likes on 5 Posts
Default

Originally Posted by docwyte
Doing #2 as the brake pedal doesn't travel as far down as it used to and I can't heel/toe the way it is. Gas pedal is too low, so hopefully this will solve it.
You know you can adjust the height of the brake pedal? Its on a turn-buckle. Its a real PITA to get to, but it adjusts just like the PS and Alt belts on your old turbo engine.


As for me..... There really is no off season, so I buy "spares" to rebuild while I drive my car, then I can transplant when I get the time.

I'm build a 951 engine (See my sig)... I plan to turbo my NA!
Brakes
951 trans
suspension
paint

Pretty much have a 25 year old car with 0 miles, and 400rwhp!
Old 11-27-2010, 08:41 PM
  #11  
AScholtes
Pro
 
AScholtes's Avatar
 
Join Date: Sep 2010
Location: Upstate, South Carolina
Posts: 546
Likes: 0
Received 0 Likes on 0 Posts
Default

hmmm, maybe get a little time off so I can do the water pump, all the hoses, timing belts and pulleys, Odometer gear, LED upgrade to the dash lights and a reupholster the interior (dash is already in progress).... I think that may do it for the winter...
Old 11-27-2010, 08:56 PM
  #12  
333pg333
Rennlist Member
 
333pg333's Avatar
 
Join Date: Feb 2006
Location: Australia
Posts: 18,924
Received 97 Likes on 80 Posts
Default

The interim car seems to be taking on the Main car status, so:

-Install new motor
-Tune for E85
-Sort out Traction Control
-retrofit ABS
-Cage compliant to do door to door racing
-Seat, harness, HANS
-Fit solid roof
-Fit carbon doors
-Paint
-Brakes
-Tranny mods and/or new tranny
-Fit Motons with remote reservoirs

...not much....
Old 11-27-2010, 09:06 PM
  #13  
GreyDog
Rennlist Member
 
GreyDog's Avatar
 
Join Date: Feb 2004
Location: Clinton, CT
Posts: 225
Likes: 0
Received 1 Like on 1 Post
Default

Hoping to finish the venturi delete and Ice Shark battery cables in another week. Oh, and upper strut mounts.

After that, contemplate rear suspension rebuild, very cluncky back there... good project for the semi-warmer basement.

Oh, and figure out how to afford a paint job !!!

Springtime will hopefully be interior re-carpet and audio project.

...now to fit in some time to actually work at my other job....
Old 11-27-2010, 10:22 PM
  #14  
incomplete
Racer
 
incomplete's Avatar
 
Join Date: Oct 2009
Location: san jose, ca
Posts: 290
Likes: 0
Received 1 Like on 1 Post
Default

my project is the whole damn car! i'm hoping to get it assembled, broken in, unbroken from the breaking in period and to the track by the spring!

what am i doing? a complete suspension/braking system/coolant/vacuum/fuel delivery/intake/exhaust refresh!

http://picasaweb.google.com/incomple...44TurboProject

happy holidays!
Old 11-27-2010, 11:00 PM
  #15  
David Floyd
Addict
Rennlist Member

 
David Floyd's Avatar
 
Join Date: May 2001
Location: Tennessee
Posts: 7,109
Received 4 Likes on 4 Posts
Thumbs up

Finish 996T monobloc caliper install

Larger mc for said calipers

V-Flex E85

stiffer suspension ( may have to wait for next off season )


Quick Reply: So what little projects are you guys doing in the offseason?



All times are GMT -3. The time now is 07:02 AM.