User 52121

Ok maybe a silly question. About to install a TiAL 38 on my 86. Got the WG and adapters from SFR, pre assembled. Looking at how it'll line up with the exhaust, is this thing supposed to sit sideways? Or did the put the adapters on backwards?

Darwantae951

It mounts opposite of the factory wastegate. You want the face of the valve against the crossover pipe.

DDP

And the boost signal goes to the SIDE port of the WG, the top vents if you're running single port.

Paulyy

do you want a picture of mine, i have a TiAL 38mm in my 86 951

Darwantae951

Very important and good to note here. Ensure your vacuum lines are routed correctly!

User 52121

Got it... thanks guys!!

No picture needed. It's all mounted. Still finishing up the rest of the Vitesse install.

Adonay

what vitesse stuff are you installing ? Remember to use a vacuum line on that wastegate it wont work on spring pressure by it self ask me how i know.

User 52121

MAF, V-Flex, and Piggyback.

WG connections are hooked up via John's instructions for his boost solenoid.