Injectors/power perfect questions
#16
Rennlist Member
AND FWIW, I have been running my car for a year or so with the same 55lb injectors (from LR), no resistors, and my DME has yet to burst into flames, or even have a hickup on the injector drivers...
Happy endings are my favorite way to bring something to closure!
Patrick, it is beter to have a happy ending, than to see one!
Party On!
Happy endings are my favorite way to bring something to closure!
Patrick, it is beter to have a happy ending, than to see one!
Party On!
#17
Addict
Rennlist Member
Rennlist
Small Business Partner
Rennlist Member
Rennlist
Small Business Partner
However the injector circuit is being driven extremely hard without resistors. And that creates a lot of heat - not good for >20year old circuits.
John, go do a spirited run, then touch the bottom of the DME - I'll bet you its quite warm.
#18
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I did the same... for a while.
However the injector circuit is being driven extremely hard without resistors. And that creates a lot of heat - not good for >20year old circuits.
John, go do a spirited run, then touch the bottom of the DME - I'll bet you its quite warm.
However the injector circuit is being driven extremely hard without resistors. And that creates a lot of heat - not good for >20year old circuits.
John, go do a spirited run, then touch the bottom of the DME - I'll bet you its quite warm.
is on the other side of the sheet metal.
__________________
Mike or Dave Lindsey
www.lindseyracing.com
U.S. 1-877-943-3565
Other 1-405-947-0137
Mike or Dave Lindsey
www.lindseyracing.com
U.S. 1-877-943-3565
Other 1-405-947-0137
#19
Addict
Rennlist Member
Rennlist
Small Business Partner
Rennlist Member
Rennlist
Small Business Partner
#20
Nordschleife Master
I am actually preparing to go stand alone, so the DME is becoming less relevant.. not to mention the engine is out of the car right now..
Good things are coming!