When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Did you cut the lamp´s support leg to give room for the filter?
Does the light vibrate when the car is moving, or its ok without that support?
I did cut the leg and I trimmed off part of the bracket for the light raising mechanism. The light does not vibrate and the light raising mechanism bracket is still rock solid.
I would highly suggest using a 15 deg bend in the intercooler piping and use less length on the intercooler coupler. Same thinking goes for the filter. Use a bend.
I would highly suggest using a 15 deg bend in the intercooler piping and use less length on the intercooler coupler. Same thinking goes for the filter. Use a bend.
i agree with 95one, on boost the coupler will move around and thers more of a chance of it blowing off the tube,
I would highly suggest using a 15 deg bend in the intercooler piping and use less length on the intercooler coupler. Same thinking goes for the filter. Use a bend.
Bump.
Still for sale.
The pipe to the filter is a bend. It's just hard to make out in the picture.