Bought another block to go into my car - weekend of 19th
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here are a couple threads on the background of what I've been dealing with.
https://rennlist.com/forums/944-turb...-problems.html
https://rennlist.com/forums/944-turb...need-help.html
Can't seem to figure out the leakdown and compression issues with my block so I purchased another motor off ebay.
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
I am hoping it arrives by early next week. I am planning on putting it into the car on the weekend of the December 19th and 20th. If anyone wants to come by and watch or help that would be great. Will be doing it in a shop with a lift thankfully. I've already pulled the intake and cam tower back off my block. Plan on pulling the head and exhaust before I roll it over to the shop.
I've been trying to decide if I should go ahead and put on this big valve head or go back in at a later time and do that. I suppose I'll bolt on the new turbo for sure.
https://rennlist.com/forums/944-turb...-problems.html
https://rennlist.com/forums/944-turb...need-help.html
Can't seem to figure out the leakdown and compression issues with my block so I purchased another motor off ebay.
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
I am hoping it arrives by early next week. I am planning on putting it into the car on the weekend of the December 19th and 20th. If anyone wants to come by and watch or help that would be great. Will be doing it in a shop with a lift thankfully. I've already pulled the intake and cam tower back off my block. Plan on pulling the head and exhaust before I roll it over to the shop.
I've been trying to decide if I should go ahead and put on this big valve head or go back in at a later time and do that. I suppose I'll bolt on the new turbo for sure.
#3
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Checked with Mark and he thinks that the motor should be here on Monday or Tuesday. I've been thinking I should track down a new clutch.
#4
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
While you are in there...
the list can be almost endless. Definitely reseal the new motor, new belts, new clutch and maybe motor mounts. I would leave the head alone and drive it for a while to see how it runs before i spent any more money on it.
If i lived closer i would lend a hand.
the list can be almost endless. Definitely reseal the new motor, new belts, new clutch and maybe motor mounts. I would leave the head alone and drive it for a while to see how it runs before i spent any more money on it.
If i lived closer i would lend a hand.
#6
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Josh, PLEASE put in a new set of rod bearings, OK? Trust me, you will need them this June because I want to finish what I started with you at Road Atlanta. A set of Hoosiers would be nice too if you show up with those too.
Trending Topics
#8
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yee Hah - motor came in yesterday! Bought a new 951 sport clutch for a good deal on ebay - $180 plus shipping. I have the head back off of the motor still in my car. Maybe I can just slip the short block out the top and then put in the 88 short block and bolt everything back on.....
#9
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Went over to the shop last night. Pulled a bunch of stuff off the motor that I don't need or already have. Got the fuel rail, intake, cam tower off. Still need to pull the head and the turbo and AC compressor. I suppose I should do a leak down on the block before pulling the head. Hope that goes ok. Does it really matter where the piston is for leakdown if the cam tower is off so that the valves are both shut?
![](http://members.rennlist.org/jjbare/88Motor.jpg)
Last edited by Josh B; 12-17-2009 at 11:50 AM.
#12
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hey Ryan - would be great to see you. Hope things are going well. We'll be out there on the 19th and 20th. Heated garage
Do you still have my cell #?
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)