FS: Vitesse goodies
#1
Former Vendor
Thread Starter
FS: Vitesse goodies
Hello!
This is my ad from member's classifieds:
****************************************************
A complete set of Vitesse Racing engine management for a 951.
http://www.vitesseracing.com/html/en...anagement.html
*MAF kit for 3.0l with PiggyBack
-accompanied with MAP sensor for new V-flex functions ( see link in web-page )
*Wasted Spark ignition control
In addition to these of course the DME ( The Vitesse chipboard is built in ) and the KLR comes too, and Wasted Spark Coil with new OEM ( Beru ) ignition cables, all built in to a 951 engine wiring loom.
Also in the loom and set are VEMS Round WBO2 gauge with Bosch LSU-4 sensor and an EGT sensor.
See attached pictures. Asking US$3000,-
EDIT: Will be sold complete, so Wasted Spark is NOT available separately!!
**************************************************
How on earth can you get ads to RL marketplace?? Am I a complete n00b??
BTW, pictures available, PM.
This is my ad from member's classifieds:
****************************************************
A complete set of Vitesse Racing engine management for a 951.
http://www.vitesseracing.com/html/en...anagement.html
*MAF kit for 3.0l with PiggyBack
-accompanied with MAP sensor for new V-flex functions ( see link in web-page )
*Wasted Spark ignition control
In addition to these of course the DME ( The Vitesse chipboard is built in ) and the KLR comes too, and Wasted Spark Coil with new OEM ( Beru ) ignition cables, all built in to a 951 engine wiring loom.
Also in the loom and set are VEMS Round WBO2 gauge with Bosch LSU-4 sensor and an EGT sensor.
See attached pictures. Asking US$3000,-
EDIT: Will be sold complete, so Wasted Spark is NOT available separately!!
**************************************************
How on earth can you get ads to RL marketplace?? Am I a complete n00b??
BTW, pictures available, PM.
Last edited by pete95zhn; 12-04-2009 at 04:16 PM.
#3
Former Vendor
Thread Starter
I had to add it after third PM...
BUT, as John stated, having a WS is a excellent selling argument. BTW, if in doubt, ask John about the kit.
It's built in the 951 loom with plugs/connectors ( whatever ), truly a bolt-one, you just have to add power supply ( connect one wire where the coil is originally ), configure one multi-pin plug ( depending on MY, it's now suitable for '86 loom, easy to change ) and add your own swiches to dashboard for map and fuel grade selection ( if you want to use those features ).
BUT, as John stated, having a WS is a excellent selling argument. BTW, if in doubt, ask John about the kit.
It's built in the 951 loom with plugs/connectors ( whatever ), truly a bolt-one, you just have to add power supply ( connect one wire where the coil is originally ), configure one multi-pin plug ( depending on MY, it's now suitable for '86 loom, easy to change ) and add your own swiches to dashboard for map and fuel grade selection ( if you want to use those features ).