Can anyone give me the drag coefficient or frontal area of a 951?
#1
Rennlist Member
Thread Starter
Can anyone give me the drag coefficient or frontal area of a 951?
Like the tile says... I'm looking for the frontal area and coefficient of drag for a 951 (either measured or published by Porsche).
Anyone have those #s?
(I'll trade the CG height for them!)
Anyone have those #s?
(I'll trade the CG height for them!)
#3
Rennlist Member
Thread Starter
I think you're in the ball park, Mike. I found this:
Turbo Cd with rear wiper 0.33, without 0.32
Frontal area... sources all say 1.89-1.90 m*m
Turbo Cd with rear wiper 0.33, without 0.32
Frontal area... sources all say 1.89-1.90 m*m
Trending Topics
#8
Three Wheelin'
It's been a while and I'm not about to dust any books off, so I'll go with what's available on-line.
There is a listing for the CdA of a 944S at 6.96. CdA is obtained by Cd * Area (A).
So A= CdA/ Cd. seems to simple.
It puts us around 21ft^2 to 23ft^2, with the assumption the 944S has the same Cd.
Source:
http://en.wikipedia.org/wiki/Automob...g_coefficients
There is a listing for the CdA of a 944S at 6.96. CdA is obtained by Cd * Area (A).
So A= CdA/ Cd. seems to simple.
It puts us around 21ft^2 to 23ft^2, with the assumption the 944S has the same Cd.
Source:
http://en.wikipedia.org/wiki/Automob...g_coefficients
#9