Dualport wastegate...Really worth it?
#20
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#21
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
i can't understand why any one would bother with anything other than the lihndsey one
i just cut up my old one an increased the spring pressure and have inline check/ Lindsey boost enhancer thing i set the waste gate and the valve up on the bench.
i put the time in . but if lihnsey don't give custom spring pull it out an buy one and its done tial wastegates are fashion accessory's
i just cut up my old one an increased the spring pressure and have inline check/ Lindsey boost enhancer thing i set the waste gate and the valve up on the bench.
i put the time in . but if lihnsey don't give custom spring pull it out an buy one and its done tial wastegates are fashion accessory's
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
#22
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#24
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
do asearch here. LOTS o info. LR is close to you. They would probably a good group for you to work with.
the 3" exhaust issue is usually based on an old cat. Full 3" will allow faster spool up. It's noticeable. Good WG is also noticeable.
These are basically the first mods to make.
the 3" exhaust issue is usually based on an old cat. Full 3" will allow faster spool up. It's noticeable. Good WG is also noticeable.
These are basically the first mods to make.
#25
Three Wheelin'
Join Date: Sep 2005
Location: Tulsa Oklahoma
Posts: 1,965
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Damn, they are close aren't they? I never looked down at the bottom of their site for a location, or contact info. Looks like I'll have to save up my allowance and go have a field trip at the toy store.
#26
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I guess the advantage of the LR one is it is a modified stock and therefore a direct replacement. The Tial does take a little bit more work to make fit and there is not a lot of meat on the edge of the flange to provide the best seal. Perhaps I'm in the minority here, and to be honest I wouldn't not use a Tial in another application, but I did have my Tial 38 jam shut and I boosted up to 2.1 bar on the track with a helmet on and couldn't hear my engine pinging it's brains out. Car was quite frisky all the same
Can't believe I got to drive home that day! I believe the larger Tial has a better fitting flange?
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#28
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#29
Rennlist Member
#30
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I guess the advantage of the LR one is it is a modified stock and therefore a direct replacement. The Tial does take a little bit more work to make fit and there is not a lot of meat on the edge of the flange to provide the best seal. Perhaps I'm in the minority here, and to be honest I wouldn't not use a Tial in another application, but I did have my Tial 38 jam shut and I boosted up to 2.1 bar on the track with a helmet on and couldn't hear my engine pinging it's brains out. Car was quite frisky all the same
Can't believe I got to drive home that day! I believe the larger Tial has a better fitting flange?
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)