Interest in a New Splitter?: UPDATED!
09-11-2008, 10:14 AM
#121
Race Director
Thread Starter
Great work CPR. I'm really curious about the track version as well.
Keep in mind that PCA club racing stock class rules (which a lot of us run under andI guess would be your prime target for the track version) have a 1" limitation:
"Spoilers and bumpers/air dams are free providing they do not exceed ... maximum factory body length by more than 1 inch..."
So, if the race splitter extends more than 1" beyond the most forward point of the front bumper cover, then technically it is illegal for stock classes.
Keep in mind that PCA club racing stock class rules (which a lot of us run under andI guess would be your prime target for the track version) have a 1" limitation:
"Spoilers and bumpers/air dams are free providing they do not exceed ... maximum factory body length by more than 1 inch..."
So, if the race splitter extends more than 1" beyond the most forward point of the front bumper cover, then technically it is illegal for stock classes.
09-11-2008, 10:15 AM
#122
Drive-by provocation guy
Rennlist Member
Rennlist Member
Join Date: Apr 2002
Location: NAS PAX River, by way of Orlando
Posts: 10,439
Likes: 0
Received 0 Likes
on
0 Posts
Then what would I spend MY money on? Beer and hookers?
Seriously though, the money is not a problem, I've definitely got that covered. Time is the problem. I am in the middle of selling one company, runnning two others, fending off a viscous divorice attorney and somewhere in between trying to get this splitter finished. My RE's and chem heads are already working alot of OT on Uncle Sam's dime. I seriously appreciate your offer, but if we can just get the templates finished by next Tuesday I will still make the aforementioned 2 week goal.
And thanks again for all the unreal support and offers for testing. Watch you PM's next week.
Seriously though, the money is not a problem, I've definitely got that covered. Time is the problem. I am in the middle of selling one company, runnning two others, fending off a viscous divorice attorney and somewhere in between trying to get this splitter finished. My RE's and chem heads are already working alot of OT on Uncle Sam's dime. I seriously appreciate your offer, but if we can just get the templates finished by next Tuesday I will still make the aforementioned 2 week goal.
And thanks again for all the unreal support and offers for testing. Watch you PM's next week.
$100K to start and company car???? lol
Splitters look great!
09-11-2008, 03:01 PM
#127
Race Director
Thread Starter
Must have at least 1 of the 3 requirements:
1. electrical engineering degree- or the willingness to BS your way through boring DB meetings while sipping Wild Turkey in your coffee.
2. degree in chemical engineering- or the willingness to BS your way through batch mixing by "experimenting" (not repsponsible for loss of fingers, hands or 2-3rd degree burns.
3. Have the inate ability to pick-up women, bar tabs and a drunken boss at 3 AM no questions asked.
09-11-2008, 03:10 PM
#128
Rennlist Member
Join Date: Feb 2003
Location: Chicago
Posts: 3,526
Likes: 0
Received 0 Likes
on
0 Posts
Must have at least 1 of the 3 requirements:
1. electrical engineering degree- or the willingness to BS your way through boring DB meetings while sipping Wild Turkey in your coffee.
2. degree in chemical engineering- or the willingness to BS your way through batch mixing by "experimenting" (not repsponsible for loss of fingers, hands or 2-3rd degree burns.
3. Have the inate ability to pick-up women, bar tabs and a drunken boss at 3 AM no questions asked.
1. electrical engineering degree- or the willingness to BS your way through boring DB meetings while sipping Wild Turkey in your coffee.
2. degree in chemical engineering- or the willingness to BS your way through batch mixing by "experimenting" (not repsponsible for loss of fingers, hands or 2-3rd degree burns.
3. Have the inate ability to pick-up women, bar tabs and a drunken boss at 3 AM no questions asked.
Hmm,
#1 and #3 are no problem. #2 sounds a bit dangerous but they do make gloves for that.
09-11-2008, 03:16 PM
#130
Rennlist Member
Join Date: Mar 2005
Location: Norfolk,Va.
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
I want a V-1, count me in. Also if u aren't getting enough request for the 3 piece spoilers to place an order, I would like to get the 4 piece if they are still available.
Is there any special requirements to paint a V-1 ?
Is there any special requirements to paint a V-1 ?
09-11-2008, 03:22 PM
#131
Race Director
Thread Starter
I'll PM you later on the wing.
09-11-2008, 04:17 PM
#132
Burning Brakes
Join Date: Nov 2005
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
"3. Have the inate ability to pick-up women, bar tabs and a drunken boss at 3 AM no questions asked."
I have a lot of experience with number 3.
Oh wait........I'm the drunken boss who's picked up at 3 in the morning. Sorry.
I have a lot of experience with number 3.
Oh wait........I'm the drunken boss who's picked up at 3 in the morning. Sorry.
09-11-2008, 05:13 PM
#133
Rennlist Member
Must have at least 1 of the 3 requirements:
1. electrical engineering degree- or the willingness to BS your way through boring DB meetings while sipping Wild Turkey in your coffee.
2. degree in chemical engineering- or the willingness to BS your way through batch mixing by "experimenting" (not repsponsible for loss of fingers, hands or 2-3rd degree burns.
3. Have the inate ability to pick-up women, bar tabs and a drunken boss at 3 AM no questions asked.
1. electrical engineering degree- or the willingness to BS your way through boring DB meetings while sipping Wild Turkey in your coffee.
2. degree in chemical engineering- or the willingness to BS your way through batch mixing by "experimenting" (not repsponsible for loss of fingers, hands or 2-3rd degree burns.
3. Have the inate ability to pick-up women, bar tabs and a drunken boss at 3 AM no questions asked.
