Dyno chart. Poll is answered.
07-26-2008, 11:23 PM
#1
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
Dyno chart. Poll is answered.
FINALLY
1. Head gasket blows.....
NO.. Helll yeah.
Screw you headgasket guys!!! (I was of course truly worried and am just kidding out of relief)
Held strong. Ski - Or was that Chris? Toilet paper gasket held. Good call
2. I don't get boost as fast as K26.... WINNERS - (Like this was a long shot or something..)
You are correct! But barely. It hardly compares. check out the miniscule stock boost curve relative to the new one
3. Boost as fast as K26............ wrong but DAAAAAAMMMMMn comparing graphs, who cares! (edited)
4. Make power sooner than some Stroked motors.... Also Correct!
You guys can overlay some of the others on here. It took me forever to overlay my stock one against this as extremely accurate as I could. I'm not saying all or even alot... But definately better than some. Love this turbo.
Made this horsepower at 22psi.
I'm only going to run 18psi. After some wideband screw ups (Was on its way out screwing up our tuning horribly) and a replacement wideband. Power came up where it should have been. 365 @18. I don't think I mad as much horsepower as I increased boost to 22psi because I truly think I was reaching the bottleneck of the head. Porting it should wake this number up to around 440.whp @ 22psi.
I'm just so happy to have a running car. It took everything in me to risk death and turn up the boost past 400hp. I just want to drive my car and I didn't want to take any more risks. But... Fuc#$ it. It paid off. - Thank god.
Thanks to all that helped with my questions, and shared with your experience. They all truly made a difference.
UMMMMMMMMM Suddenly today of all freakin days I'm not a member!!!!! Won't let me post pics of my dyno. Son of a........... Par for the course on this freakin project. ways around that. Will be a member again shortly
1. Head gasket blows.....
NO.. Helll yeah.
Screw you headgasket guys!!! (I was of course truly worried and am just kidding out of relief)
Held strong. Ski - Or was that Chris? Toilet paper gasket held. Good call
2. I don't get boost as fast as K26.... WINNERS - (Like this was a long shot or something..)
You are correct! But barely. It hardly compares. check out the miniscule stock boost curve relative to the new one
3. Boost as fast as K26............ wrong but DAAAAAAMMMMMn comparing graphs, who cares! (edited)
4. Make power sooner than some Stroked motors.... Also Correct!
You guys can overlay some of the others on here. It took me forever to overlay my stock one against this as extremely accurate as I could. I'm not saying all or even alot... But definately better than some. Love this turbo.
Made this horsepower at 22psi.
I'm only going to run 18psi. After some wideband screw ups (Was on its way out screwing up our tuning horribly) and a replacement wideband. Power came up where it should have been. 365 @18. I don't think I mad as much horsepower as I increased boost to 22psi because I truly think I was reaching the bottleneck of the head. Porting it should wake this number up to around 440.whp @ 22psi.
I'm just so happy to have a running car. It took everything in me to risk death and turn up the boost past 400hp. I just want to drive my car and I didn't want to take any more risks. But... Fuc#$ it. It paid off. - Thank god.
Thanks to all that helped with my questions, and shared with your experience. They all truly made a difference.
UMMMMMMMMM Suddenly today of all freakin days I'm not a member!!!!! Won't let me post pics of my dyno. Son of a........... Par for the course on this freakin project. ways around that. Will be a member again shortly
Last edited by 95ONE; 07-28-2008 at 12:33 PM.
07-26-2008, 11:32 PM
#2
Monkeys Removed by Request
Lifetime Rennlist
Member
Lifetime Rennlist
Member
365? holy ****. Thats what im hoping for.
I guess thats what alot of fine tuning will get you. Too bad I won't be going that far into it.
Its nice to know whats possible though. NICE NUMBERS!
I guess thats what alot of fine tuning will get you. Too bad I won't be going that far into it.
Its nice to know whats possible though. NICE NUMBERS!
07-26-2008, 11:37 PM
#7
Drifting
Join Date: Mar 2006
Location: midwest
Posts: 2,931
Likes: 0
Received 0 Likes
on
0 Posts
NICE!
I have been thrashing hard - mine is finally coming together. I really want 350 whp at 15psi!
(VR stage3, wasted spark, etc,etc)
email dyno chart and I will post!
see pm
I have been thrashing hard - mine is finally coming together. I really want 350 whp at 15psi!
(VR stage3, wasted spark, etc,etc)
email dyno chart and I will post!
see pm
Trending Topics
07-26-2008, 11:45 PM
#8
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
It has been emailed. - Thanks!
07-26-2008, 11:58 PM
#11
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
His RPM connection was broke.... I know... I know.....
So I don't have the RPM comparison. I am very sorry. This is the one that is more important to me. It would have also given Torque. It did read on one of the 15psi runs. (I don't have a copy of that one. ) It (torque) seemed ridiculouly flat.
22psi was straight off the MAP sensor. (Manifold pressure)
So I don't have the RPM comparison. I am very sorry. This is the one that is more important to me. It would have also given Torque. It did read on one of the 15psi runs. (I don't have a copy of that one. ) It (torque) seemed ridiculouly flat.
22psi was straight off the MAP sensor. (Manifold pressure)
07-27-2008, 01:53 AM
#14
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
with your mods, you're sure to make that power. I'm sure of it now
07-27-2008, 02:05 AM
#15
Monkeys Removed by Request
Lifetime Rennlist
Member
Lifetime Rennlist
Member