3 liters of tranny-blowing power
#32
Addict
Rennlist Member
Rennlist Member
chris cervelli rebuilt this car too...see what happened after the owner got it back?
However, I did sacrifice two beetles and one rollie pollie and the vented nose panel is about to brought back to life with a new coat of black paint.
However, I did sacrifice two beetles and one rollie pollie and the vented nose panel is about to brought back to life with a new coat of black paint.
#34
Addict
Rennlist Member
Rennlist Member
John Lemm, got rear ended at Road America after he got the car back from Chris - new engine, tranny with custom gears (that tranny is in Lindseys yellow car now ) - and he did a roll over in the gravel pit and the rear of the car was knocked over a couple of inches. When I was parting the car, everytime I'd take something off from underneath, all this white gravel would come pouring out. I saved it and gave it back to him in a potted plant. This was two 4 years ago. Back on topic...
Last edited by Ski; 03-24-2008 at 01:16 PM.
#36
Rennlist Member
Thread Starter
Made a bit of progress tonight -- wrestled the bad tranny out of the car. Not looking forward to lining up the coupler on reinstallation...
#38
Don't recognize it, but I have a SS and have it adjusted as tight as it'll go. Don't think I could live without. Going back to stock would feel too ah, slushy?
How can you do the writeup on your 3.0 build when you keep farting around with the TA?
How can you do the writeup on your 3.0 build when you keep farting around with the TA?
#39
Rennlist Member
Thread Starter
Anyone recognize the shifter?
#40
That Guy
Rennlist Member
Rennlist Member
#41
Rennlist Member
Ski, that's a hell of a story. Now that you told it, I heard about it back when it happened but you tell it a lot better. A planter...lol.
TurboX, I don't know about Tom but mine sounded like the initial bang of a car accident. Then a loud metal to metal clatter all the way home, but not in second. Second was a big continous metal crunch. Nasty.
TurboX, I don't know about Tom but mine sounded like the initial bang of a car accident. Then a loud metal to metal clatter all the way home, but not in second. Second was a big continous metal crunch. Nasty.
#42
#43
Rennlist Member
Thread Starter
#44
Rennlist Member
Thread Starter
Good news is I had the LSD tranny waiting in the wings, and finished installing it this morning. Just took it on a test drive and all is good again at 18psi -- now with more traction!
#45
Rennlist Member
^^Excellent news Tom^^ Look forward to hearing some more progress of your car now.