Are these Guy's, Dynatech motorsports still in business ??
06-29-2006, 10:23 AM
#32
Burning Brakes
Join Date: Mar 2003
Location: Dallas, then Annapolis - now Laguna Beach CA. Well, not so fast - I'm back in Dallas. For good!
Posts: 765
Likes: 0
Received 1 Like
on
1 Post
I've had intentions of buying both, and would be buying now, but...
I'll need some assurance of after purchase support. If by some chance I got the wrong part, or a piece was machined incorrectly, I don't want to be the proud owner of $800.00 of stuff I can't use or return...
I'll need some assurance of after purchase support. If by some chance I got the wrong part, or a piece was machined incorrectly, I don't want to be the proud owner of $800.00 of stuff I can't use or return...
07-06-2006, 03:41 AM
#35
Rennlist Member
Thread Starter
Yes and no
I got an email from Scott today and he said that he still was waiting on the polishing .....
He said he will let me know as soon as he knows. I am leaving out of town, so I gave him my cell #
As soon as I hear I will post
Sorry
Thanks
Ed
I got an email from Scott today and he said that he still was waiting on the polishing .....
He said he will let me know as soon as he knows. I am leaving out of town, so I gave him my cell #
As soon as I hear I will post
Sorry
Thanks
Ed
07-13-2006, 01:07 PM
#37
Rennlist Member
Thread Starter
I am in NY right now I just emailed Scott ....Hope to hear by weeks end
Sorry for the delay, but its a little outta my hands ....
Regards
Ed
Sorry for the delay, but its a little outta my hands ....
Regards
Ed
07-13-2006, 02:28 PM
#38
Addict
Rennlist Member
Rennlist Member
Hi Ed,
Sorry - not meaning to put you in the middle. Just really interested in these parts and hoping to keep this possibility alive. Sure do wish I could figure out how to make these. Maybe Scott would be interested in selling the business?
-Josh
Sorry - not meaning to put you in the middle. Just really interested in these parts and hoping to keep this possibility alive. Sure do wish I could figure out how to make these. Maybe Scott would be interested in selling the business?
-Josh
07-14-2006, 08:34 AM
#39
Rennlist Member
Thread Starter
Your not, no worries, but I have to say, I am a bit surprised at this point. As I thought we would have started the GB by now
I spoke to Scott for like a hour a few weeks ago ....
Reagrds
Ed
UPDATE
I had gotten an email from Scott before I posted this, they are being sent to get polished, let's keep our fingers crossed( either way Scott has done all he can to get this going )
Regards
Ed
I spoke to Scott for like a hour a few weeks ago ....
Reagrds
Ed
UPDATE
I had gotten an email from Scott before I posted this, they are being sent to get polished, let's keep our fingers crossed( either way Scott has done all he can to get this going )
Regards
Ed
Last edited by Crazy Eddie; 07-20-2006 at 04:00 PM.
07-20-2006, 04:07 PM
#40
Rennlist Member
Thread Starter
Guys
Good news, they found a polisher that can do the work for them, they are asking for four weeks to do the polishing ( They will be getting all of their inventory done at the same time. (These polishers are super busy ) They will need a week or so to get things put together, the cost for a group buy will be $325.00 + shipping which is around $25.00. So lets see how many we can get.
These wont ever be made again and they have 15 in stock that will be polished, and ready to go in about six weeks, the camber plates will be done at around the same time.
So let me know wwhat you guys think ....
regards
Ed
Good news, they found a polisher that can do the work for them, they are asking for four weeks to do the polishing ( They will be getting all of their inventory done at the same time. (These polishers are super busy ) They will need a week or so to get things put together, the cost for a group buy will be $325.00 + shipping which is around $25.00. So lets see how many we can get.
These wont ever be made again and they have 15 in stock that will be polished, and ready to go in about six weeks, the camber plates will be done at around the same time.
So let me know wwhat you guys think ....
regards
Ed
07-20-2006, 05:44 PM
#42
8th Gear
Join Date: Apr 2004
Location: Massachusetts, USA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Ed, any word on the 968 strut brace? I had a communication with Scott and he indicated that he stopped making it, but I'm wondering if there are any spares available. If so, I'd be in for one.
