hosrom_951

Hey,
To those who installed catch cans or replaced the AOS hoses, what is the ID measurement?

NZ951

16mm should do it. I used a dash 10 SS hose.

hosrom_951

thnx!

NZ951

BTW it really depends on the size of the fitting going on to it, I have a 13mm inlet on my can so got the dash 10 and warmed it up and made it fit, rubber can stretch quite well, and can be clamped a bit too.

hosrom_951

Yep, i know clamps would help "shrink" down the sizes a bit, i was concerned on the "biggest" ID (AOS).

hosrom_951

Anyd; What do you mean "dash 10 SS"? is that for a specific SS hose?

NZ951

Yup, Aeroquip etc use dash whatever for SS sizes. Though these vary between manufacturers as well.

hosrom_951

Know where i could get my hands on SS lines??

NZ951

Your local hydro store. You guys still have industry with oil under pressure over there right?

hosrom_951

NO OIL IN DUBAI!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!



Sorry, but i was given that statement so many times that im sick of it

Seriously, the best deal i got was something like $500 for a BIG *** quantity....

Local stores don't have it, but there is one store 1hr away from me that i could TRY, i was hoping for an easier approach

NZ951

Huh? I mean you have industries that use oil, and there for need SS hoses... like ummmmmm almost any large manufacturing process.

hosrom_951

They sell in HUGE quantities only, they couldn't sell me anything <30ft in length

NZ951

How is they? There must be a mobile hydro guy that comes and fixes one off hoses...

hosrom_951

In Egypt, yes, UAE nope.

NZ951

So if any comapny has a hose leak, they have to buy 30ft of hose? Why not approach a company that uses the hose and ask to whip off a couple of feet? OR you dont actually need SS hose... any nitrile based hose would be find.