Matt H

tim - on the PLX, do you need to retain the stock 02?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

MySwiss

Matt H . You can retain your stock O2 sensor for your Smt6 and or DME. Or you can use the PLX to generate the seme narrow band signal, your stock O2 sensor would generate. But, do remember that the stock O2 sensor is a faster recting sensor in general, and therefore a better one to use for the DME .

MySwiss

Here is the ountdown as of today. Please let me know, if things have changed.
PLX-300 -------------- Innovate
1) Matt H -------------- Dan d
2) SONGZZ -------------- Sam Lin
3)Redeye ------------------- Cantresjr
4)Powpow
5)Fredis Gt
6)Mike B
7)Duke

DanD

Oh, this looks bad, don't hate us PLX buyers... Here's 2 holdouts and 2 needed for the PLX. I'm feeling a bit guilty on the LM1 side.

Matt H

Tim - what is the regular price of the PLX unit?

If you retain the stock O2 for the DME then I suppose you weld another bung for the new O2 and just run the two "side-by-side"?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

p0wp0w

Yeah,
weld on this bung: http://store.summitracing.com/partde...rt=SUM%2DG2990

And you can run it side-by-side i believe

Sam Lin

Dan D, if it makes you feel any better, there's no way in hell I'd change to the PLX.

Sam

DanD

Me too...

Impressive device to say the least. SEMA award and all that rot...
If I had one car, I might be tempted to go the other way.

SoloRacer

Here is a link with the SMT6 software (along with others)

http://www.tuningtechnology.com/new_site/downloads.html

SoloRacer

There is another set up by FJO that guys I know are using and are happy with. They even have a cool standard gauge that has both a digital numeric and bar graph reading. Go to http://www.fjoracing.com/

MySwiss

Guys. The Innovate kit comes with a bung and plug, CD, Manual, cigarette lighter adapter, serial cable adapter for PC,and a 9volt battery.

I hope this will clear up some questions

cantresjr

I already pm'd myswiss i'm in on the LM1. instead of the PLX

tazman

Everything I have read about WB O2 sensors says you should mount it after the turbo down near the CAT.

MySwiss

Cantresjr. I just updated the list above. You are now on the Innovate side.

Matt H

Myswiss, please email me at mharrison@bfusa.com tomorrow, please. I need to clear up some things between the two. I am in on one of them but I would like to discuss some items with you before I finalize my decision.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote