NZ951

I am after a Bosch 3 bar reg after my piece of crap Powerhaus AFPR died after 10 months, I cant find my receipt after 10 months, lesson there! and they cant find a record. So I am boned. Anyone want this one for reconditioning? Maybe put a new flange in it? I would like to buy a bosch 3 bar, easier to tune with my setup I think. Offers?

TonyG

Why don't you save the money on a 3 bar regulator, install your stock 2.5 bar, and use the money towards a larger set of injectors.

That's a far better solution. Plus... if you are really putting out 315DIN (which is approx 310SAE), you're getting real close to the limit of the stock injectors anyway.

I'm presuming by your sig that you have stock injectors.


TonyG

NZ951

Yup, stock injectors, they were hitting 99% for a period of time. Though I never ran leaner than desired. I thought SAE overestimated when comapred to DIN?

tony s

i have one bosch 3 bar fpr used for 8 months , i sale to you for $28

TonyG

NZ951

You're making a big mistake of running your injectors at that duty cycle. When they fail (and they will miss a "beat" eventually whether it's not opening up properly or locking open, etc...) you will wish you ran larger injectors.

Do it right.

TonyG

NZ951

Yes dad. I will talk to Link and got some next week... mope.

TonyG

Get some Siemens 72lbs injectors.

They work great, and will give you plenty of room to grow.

TonyG

NZ951

Oh like the racetronix ones?

Eyal 951

clean up your room too!

NZ951

Tony S, I will take that if you are still keen on selling it...

schnellfahrer

Any drawbacks on running 72lbs injectors if you only need 55lbs?

NZ951

Used to be rough idle, but a guy I know is running 95lb IIRC with a link and it idles fine...