MAP 2 Kit for sale (from my 951 with a thrown rod) EDIT: other cool stuff too
11-25-2003, 06:41 PM
#1
User
Thread Starter
Join Date: Jan 2003
Location: Camden SC
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
MAP 2 Kit for sale (from my 951 with a thrown rod) EDIT: other cool stuff too
Hi all, as some of you know i blew up my 951 of about 3 years a month or so ago. I have sense been working on a 968 that i bought, and have had many problems with it so far costing me a good bit of money. I didnt plan to sell my MAP kit because down the road i was going to use it for my 968 in a turbo conversion. But due to some recent motor mount/slipping balance shaft and toasted 968 tranny problems i need the money too badly.
I have a GURU MAP 2 kit with Chips, wiring harness, Intake air temp sensor, and Link handheld programmer. Everything cost me about $1485, i dont know what the going rate is, so im asking about 900 or the best offer i get after a while. The only catch is i left the Handheld programmer out in the rain one night, tryed to use it the next day and it still powers on and everything but the screen is distorted. Link will repair things for an hourly labor rate. Anybody intrested, send me an email at luftwafe46@hotmail.com
I also have a digital bar graph air fuel gauge, and TURBO Boost/vac gauge both in a black aluminum gauge pannel where the cubby hole under the raido goes, also has a bright blue shift led mounted in the midde between the gauges (hooks up to MAP Box) Someone can make me an offer on that too. Thanks.
I have a GURU MAP 2 kit with Chips, wiring harness, Intake air temp sensor, and Link handheld programmer. Everything cost me about $1485, i dont know what the going rate is, so im asking about 900 or the best offer i get after a while. The only catch is i left the Handheld programmer out in the rain one night, tryed to use it the next day and it still powers on and everything but the screen is distorted. Link will repair things for an hourly labor rate. Anybody intrested, send me an email at luftwafe46@hotmail.com
I also have a digital bar graph air fuel gauge, and TURBO Boost/vac gauge both in a black aluminum gauge pannel where the cubby hole under the raido goes, also has a bright blue shift led mounted in the midde between the gauges (hooks up to MAP Box) Someone can make me an offer on that too. Thanks.
Last edited by silicondigital; 12-19-2003 at 04:45 AM.
11-25-2003, 06:54 PM
#2
Burning Brakes
Join Date: Feb 2003
Location: Toronto, Canada
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
11-26-2003, 02:44 AM
#5
User
Thread Starter
Join Date: Jan 2003
Location: Camden SC
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
The closest picture of my gauge pannel is http://www.angelfire.com/amiga/95195...s/MVC_014F.JPG
The switch is not there, the blue LED is in its place, and the Air/Fuel gauge is where the LED is now. It has a boost and vac gauge in black that looks really nice and says TURBO in caps on the face, I forgot the brand name of my Air/Fuel gauge but it has a tinted black face that you can only see the actual lighted bar graph through, it looks really nice as well. The panel fits perfectly and attaches with the two screws that are on the front of the shifter/accesory switch bezel. There is a large (maybe 1/3" dia) blue LED light housing dead center between the two gauges that hooks up to the MAP box and lights up as a shift light at about 6000rpm.
The gauges cost me about $100, the panel $35, so im probiby looking at asking about $85?
I also forgot about my custom made polished aluminum intercooler ducts with HUGE atmospheric BOV. The setup is AWESOME and i ran it on my 951 for about 6 months. The BOV has an input bigger around then the entire housing on the stock bov. This thing makes a VERY turbo sounding "call" that everyone can distinguish. I have a picture of this setup at http://www.angelfire.com/amiga/951951951/pics/n2o.html Im asking no less then 100$ for these, including the BOV and fittings for it.
Id like to use paypal for the benifit of each party involved.
Im sad to see all my work on my 951 get gone like this but i just need the damn money
The switch is not there, the blue LED is in its place, and the Air/Fuel gauge is where the LED is now. It has a boost and vac gauge in black that looks really nice and says TURBO in caps on the face, I forgot the brand name of my Air/Fuel gauge but it has a tinted black face that you can only see the actual lighted bar graph through, it looks really nice as well. The panel fits perfectly and attaches with the two screws that are on the front of the shifter/accesory switch bezel. There is a large (maybe 1/3" dia) blue LED light housing dead center between the two gauges that hooks up to the MAP box and lights up as a shift light at about 6000rpm.
The gauges cost me about $100, the panel $35, so im probiby looking at asking about $85?
I also forgot about my custom made polished aluminum intercooler ducts with HUGE atmospheric BOV. The setup is AWESOME and i ran it on my 951 for about 6 months. The BOV has an input bigger around then the entire housing on the stock bov. This thing makes a VERY turbo sounding "call" that everyone can distinguish. I have a picture of this setup at http://www.angelfire.com/amiga/951951951/pics/n2o.html Im asking no less then 100$ for these, including the BOV and fittings for it.
Id like to use paypal for the benifit of each party involved.
Im sad to see all my work on my 951 get gone like this but i just need the damn money
11-26-2003, 02:56 AM
#6
User
Thread Starter
Join Date: Jan 2003
Location: Camden SC
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
I also have a nice little brass boost controller useful in doing away with the cycling valve on these cars, just run a hose strait from the intercooler duct, to the inline boost controller, then strait to the wastegate. It is not the cheap crap on ebay for 10$ from a fishtank. I used it alone to control my 18psi boost on my 951 for nearly a year. Ill let it go for 10$ with one of the other items.
If anyone needs any other 951 parts plese let me know
If anyone needs any other 951 parts plese let me know
Trending Topics
11-27-2003, 01:16 AM
#11
User
Thread Starter
Join Date: Jan 2003
Location: Camden SC
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
No, no clutch. It looks like the only thing i have a sure buyer for so far is the intercooler duct setup.
Everything else, despite much communication with people so far, is still up for grabs.
Everything else, despite much communication with people so far, is still up for grabs.
11-27-2003, 01:58 AM
#13
User
Thread Starter
Join Date: Jan 2003
Location: Camden SC
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
As of now, nobody has sent payment or is yet planning to. To seal off the deal someone just needs to Paypal the money plus 10$ shipping, and i will print out a packing slip and email a tracking number as soon as i recieve payment for an item.
If i dont get most of the stuff (esp. the MAP) sold in a few days im going to list it on ebay with starting prices of the prices i listed above.
If i dont get most of the stuff (esp. the MAP) sold in a few days im going to list it on ebay with starting prices of the prices i listed above.
