Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

Porken S3 Chips Question For Porken

Thread Tools
 
Search this Thread
 
Old 04-07-2017, 03:10 AM
  #16  
DeWolf
Three Wheelin'
Thread Starter
 
DeWolf's Avatar
 
Join Date: Oct 2004
Location: Australia
Posts: 1,697
Received 45 Likes on 23 Posts
Default

Ok, so looking at the choice of chips it gives me 85, 86, 86.5, 86 ROW. Mine is of course the 5.0L 32V 288HP and has the all the S4 stuff like all the Aussie 86 5.0's. So which chips for me??
Old 04-07-2017, 09:45 AM
  #17  
Andre The Giant
Rennlist Member
 
Andre The Giant's Avatar
 
Join Date: Mar 2014
Location: Gatineau, QC
Posts: 913
Received 14 Likes on 11 Posts
Default

Originally Posted by KenRudd
Most accurate ( insofar as LH is concerned) is from LH connector, pin 25 and 14 I believe:




You can also check directly at MAF, thanks Jim C for this quote:

"To check the CO-pot resistance, remove the MAF and check the resistance with an ohmmeter, between terminals 3 & 6-- see WSM pg. 24-113 for the pin numbering. "
Thank you. I will have to confirm my readings before installing my chips.
Old 04-07-2017, 10:48 AM
  #18  
skpyle
Rennlist Member
 
skpyle's Avatar
 
Join Date: Jul 2014
Location: Blacksburg, SC
Posts: 2,904
Received 483 Likes on 218 Posts
Default

Originally Posted by DeWolf
Ok, so looking at the choice of chips it gives me 85, 86, 86.5, 86 ROW. Mine is of course the 5.0L 32V 288HP and has the all the S4 stuff like all the Aussie 86 5.0's. So which chips for me??
Hi DeWolf, I'd recommend you e-mail Ken and ask him. Tell him what you've got, and he will set you up.



Quick Reply: Porken S3 Chips Question For Porken



All times are GMT -3. The time now is 01:39 AM.