WTB OB Spare wheel covering
#1
Rennlist Member
Thread Starter
WTB OB Spare wheel covering
Part # 928 556 045 02. Checked with 928 Intl while at S-Fest and nada. Please PM 77tony if you have a nice one. TIA T
Last edited by 77tony; 10-26-2016 at 12:20 PM.
#3
Rennlist Member
Hi T, your request is confusing. Are you looking for a later ribbed plastic one (~80->) or the one you have pictured - an early fibreboard one (78-79~)?
#4
Rennlist Member
Thread Starter
Hi Jim, Looking for correct unit for MY79....in fiberboard/foam. Was not aware the ribbed plastic started in MY80. Edited out of OP. TY T
Last edited by 77tony; 10-26-2016 at 02:04 PM.
#5
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
As you probably know the original cover 02 is NLA but the sticker I keep in stock 8>)
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
#6
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
The original cover from my 78 is in two nice size pieces. I'm hoping it will glue / epoxy together.
It's the fiberboard / wood style.
It's the fiberboard / wood style.
#7
Rennlist Member
Thread Starter
Trending Topics
#8
Addict
Rennlist Member
Rennlist Member
#9
Rennlist Member
Thread Starter
Last edited by 77tony; 10-26-2016 at 04:59 PM.
#10
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
IIRC, Rob Budd has a "correct" vinyl-faced grey foam for these covers. On my shopping list soon, as the edges of my original sapre-wheel cover foam are crumbling. After seeing how a few have shown off their pristine perfectly detailed spare-wheel wells, I guess that's gonna be another area to fuss over on my car.
#11
Rennlist Member
Thread Starter
IIRC, Rob Budd has a "correct" vinyl-faced grey foam for these covers. On my shopping list soon, as the edges of my original sapre-wheel cover foam are crumbling. After seeing how a few have shown off their pristine perfectly detailed spare-wheel wells, I guess that's gonna be another area to fuss over on my car.