DKWalser

Why? I understand the theoretical reasons why turbo is better (at least, I think I understand them), but even some of the turbo advocates on this forum admit that the 928 responds exceptionally well to supercharging. For street use, what are the practical benefits of turbocharging over supercharging that justify what appears to be a lot of additional complexity?

Lizard928

My own car is turbocharged.
The SC car just does not feel the same......

Darien

Gents, start another thread for your topic. This tread was started by Popo to find a used SC for sale. Anyone out there have an SC kit as a decoration willing to sell??

soontobered84

Popo,
Did you find a stray Supercharger yet?

Popo928

There have been a few options that didn't pan out. Primarily one where the seller quickly realized how much fun they could be . Still hunting: I would open it up to turbo kits collecting dust as well. Trying not to discriminate....just want used boost...and I'm being cheap.

Imo000

There was a kit that Kosmo Kramer sold to an RLer that the buyer ended up never installing. Do a search and maybe you can find the thread. It's a couple years old. Maybe the owner is willing to sell that kit.

Ralph Newman

Popo,
A couple of years ago I replaced my original Andy Keel SC with Fred Clark's Polished IC one. The original is sitting in storage right now collecting dust. I have thought often about selling it but I keep thinking I could.............get a divorce. So, I should probably sell it. It is not ICed but has lots of upgrades like machined aluminum injector cups and a custom 6 inch crank pulley. If you are interested pm me and I can give you all the details.
Ralph

karl ruiter

I have a very bare bones kit. It is the first one offered, I think. The FAST kit. It is just a bracket and pullies for supporting a Vortech blower. I also have an intercooler that goes with it, which is either a Murph or one of Carl's. Had the blower at one point, but sold it off and now doubt I will go further.

soontobered84

Ralph,
That is such a pretty sight in your avatar.

PoPo,
I think you need to buy both sets, figure out which one you want to use and give me the other.

Darien

Any update?

jwyatt8171

You have a PM Karl. If The PO is not interested I may be.

soontobered84

PoPo,
You better pull the trigger on one of these pretty quick. You stirred the pot and when they are gone, they are gone.

andy-gts

Hey,

I have a used raptor sc from 928 motorsports and put down 425 on dyno before going the stroker route....I have instructions for the install and all bits and a sharktuner for the stock brain and ezk....let me know if you are interested

andy

jwyatt8171

Hey Andy,
What stage? I'm running Stage I, but yet to see HP north of 350. Not trying to hijack the thread. How much boost were you getting out of the raptor?

EDIT: In fairness, I should add, I have not been able to build boost past 2.5PSI. I don't think it's due to the kit. I just completed intake refresh, but no luck on more boost. Compression and leakdown test soon. I might start another thread. Just wanted to add this as to not give bad info or thought about Carl's kit.

Popo928

Andy - pm sent