New lift up and running!
#1
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I finally got my lift last Saturday and installed it with a good friend. I am thrilled that after 11 years since I had my first lift that I'm once again not working on a creeper!
#2
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
WOW ! ! !
That is so cool ! ! !
May I please ask roughly how tall the upright posts measure?
Thanks in advance,
Dan
That is so cool ! ! !
May I please ask roughly how tall the upright posts measure?
Thanks in advance,
Dan
#3
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The posts are 7' tall.
#6
Racer
Thread Starter
Trending Topics
#8
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sharpsburg
#9
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Oh, oh,..! Lift envy! I want, I want!
It's on my list. A couple questions...ok, more than a couple
Length of lift, weight limit, max lift height, did you get the transom jacks, where, how much? (If you don't mind telling....i hope to get one early next year, if my bonus is good!)
It's on my list. A couple questions...ok, more than a couple
Length of lift, weight limit, max lift height, did you get the transom jacks, where, how much? (If you don't mind telling....i hope to get one early next year, if my bonus is good!)
#10
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
http://www.derekweaver.com/rodders-garage/4-post-lifts/direct-lift-pro-park-8-standard-certified-4-post-car-lift/
Check out the above website for all the information and yes I did get the sliding Jack for wheel work.
Check out the above website for all the information and yes I did get the sliding Jack for wheel work.
#11
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have the same lift except in tall version. Great tool and allows more car storage in winter...
#12
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Can I recommend... A jackshaft-style door opener? It moves the power unit to the end of the spring shaft, gets things completely clear of the area over the car. That then points to having the door tracks higher too, with a pulley and cable change. My door just clears the light fixtures, and follows the slanted ceiling in the front of the garage workbay.
Chamberlain 8500 openers are very quiet.
Chamberlain 8500 openers are very quiet.
#14
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Can I recommend... A jackshaft-style door opener? It moves the power unit to the end of the spring shaft, gets things completely clear of the area over the car. That then points to having the door tracks higher too, with a pulley and cable change. My door just clears the light fixtures, and follows the slanted ceiling in the front of the garage workbay.
Chamberlain 8500 openers are very quiet.
Chamberlain 8500 openers are very quiet.
![rockon](https://rennlist.com/forums/graemlins/rockon.gif)