BSRD is moving!
Thread Starter
Former Vendor
Joined: Feb 2004
Posts: 2,139
Likes: 2
BSRD is moving!
We are moving to the Atlanta, Georgia area and will cease operations in September for a short time while we relocate. We expect to be back up selling our Super Bearings sometime in November. Torque Tube rebuild services might be delayed a bit longer.
Just wanted to make this announcement as a courtesy if anyone was planning on rebuilding their torque tube within this year.
Thank you,
Just wanted to make this announcement as a courtesy if anyone was planning on rebuilding their torque tube within this year.
Thank you,
Burning Brakes
Joined: Jan 2012
Posts: 890
Likes: 37
From: The Heartland
Hi Constantine!
In fact, you will be getting a torque tube from me around Christmas!!! Look forward to getting one of those nice powder coated babies back by the early March time frame... Can I reserve a slot now?!
John
In fact, you will be getting a torque tube from me around Christmas!!! Look forward to getting one of those nice powder coated babies back by the early March time frame... Can I reserve a slot now?!
John
Trending Topics
Rennlist Stories
The Best Porsche Posts for Porsche Enthusiasts
Porsche Reveals Coupe Variant of the Electric Cayenne With a Fresh Look
Verdad Gallardo
10 Porsche Colors That Have More Personality Than Most People
Verdad Gallardo
Guntherwerks' Final Speedster Creation Is the Ultimate Porsche Restomod
Verdad Gallardo
10 Reasons I Hate Going to the Porsche Dealership (& the 1 Reason I Stay)
Joe Kucinski
Porsche Shakes Up The Nürburgring Lap Record Table Once Again
Verdad Gallardo
6 Ways the Porsche 911 GT3 S/C Redefines Performance
Joe Kucinski
10 Wildest Homologation Specials Porsche Ever Sold
Verdad Gallardo
Super Rare RUF BTR III Comes Out of Hibernation, Looking For a New Home
Verdad Gallardo
10 Porsche Opinions That Can Start a Fight
Joe Kucinski
Thread Starter
Former Vendor
Joined: Feb 2004
Posts: 2,139
Likes: 2
I'll email you directly. Guess you haven't started the R&R of it yet?
Yes, we dismantle, inspect, clean and powder coat the bodies before re-assembly. We will also epoxy coat the drive shaft if needed.
Here is a picture of a 944 TT with the powder coat treatment too.
It just really gives you a finished product.
Intermediate
Joined: Jul 2013
Posts: 31
Likes: 0
From: Tucson (AZ)
Constantine,
I spent a few years in Cartersville (used to work down old river road) - it's a pretty nice town! Check out the Appalachian grill.....great food!
I'd looked at a set of your bearings to replace them in a 5speed TT I've got....are you going to be shipping until sept or should I contact you now if I want to order?
There's some pretty good vendors in the area (we used A&D machine shop at work) and also Larry Smith in Rome was great when I needed a land rover v8 block sorting.....
If you need any assistance with finding your way around - let me know.
Good luck
Neil
I spent a few years in Cartersville (used to work down old river road) - it's a pretty nice town! Check out the Appalachian grill.....great food!
I'd looked at a set of your bearings to replace them in a 5speed TT I've got....are you going to be shipping until sept or should I contact you now if I want to order?
There's some pretty good vendors in the area (we used A&D machine shop at work) and also Larry Smith in Rome was great when I needed a land rover v8 block sorting.....
If you need any assistance with finding your way around - let me know.
Good luck
Neil
Thread Starter
Former Vendor
Joined: Feb 2004
Posts: 2,139
Likes: 2
Thanks everyone for the kind words and welcomes!
Looking forward to the move.
Neil,
Thanks for the information on Cartersville! Been hearing some good things about the town so we are hopeful.
As far as BSRD operations, we'll try shipping out Super Bearings and Super Clamps as long as we can before shutting down our operations in Florida. Should be into this September, but do please contact us by email if you want to get a set of our 928 Super Bearings so we can schedule it in for you.
Cheers,
Looking forward to the move.
Neil,
Thanks for the information on Cartersville! Been hearing some good things about the town so we are hopeful.
As far as BSRD operations, we'll try shipping out Super Bearings and Super Clamps as long as we can before shutting down our operations in Florida. Should be into this September, but do please contact us by email if you want to get a set of our 928 Super Bearings so we can schedule it in for you.
Cheers,
