jeff spahn

Honestly MJ I don't remember.

Yes, that was a Roger Kit I was replacing with the GB fuel hose.

It was supposed to be one of three, only the first uploaded.

jeff spahn

Yes, part of the SC install. Have a custom VCB engineering hose. Fuel system isn't stock but I wanted GB's "U" hose for the back. I didn't like the other hose and it had some cracks in it.

Greg's hoses are amazing quality. Kind of like Greg if you really think about it too much.

MjRocket

Scratch what I asked..I miss read your earlier post

Bmw635

Holy mackerel. All of those compression fit hoses are all for fuel? Is there a fuel hose diagrams that I can see where they're all located? TIA.

James Bailey

The engineers on the 928 seldom ever did things the simple way , they took clean sheet design to new heights as they strived to make it the best most advanced sports car possible. In everyone's mind was the thought that this car was the FUTURE for Porsche but the customers did not agree....

worf928

Four fuel lines in the engine bay (for '87-'95) is a lot?

Bmw635

Only four? I got lost seeing a pile of hoses. Are these the black hoses in the center of peg board?

I guess 1 in the back connecting 2 fuel rails, 1 connect rail to FPR, 1 feed into 1st rail, 1 return from 2nd rail? I am still learning these 928 systems so forgive me if I am wrong. Thanks.

worf928

You don't have your model year in your sig, so I can't be sure what you are trying to describe above. '87+ has one supply line to front dampener, one line from front dampener to right rail, one short "u-hose" between the rear dampener and pressure regulator and one line between regulator and fuel cooler.

There are several variations for pre-'87 depending on the engine.

Bmw635

Sorry Mine is 8/88 S4. Thanks.