New (to me) nav and radio for 928
#46
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,484
Received 1,634 Likes
on
1,065 Posts
Printing is the easy part. Send me the .STL file with your 3D print-model and I can get it printed.
That said (tongue in cheek) the next major iteration of my stereo may involve a 3d-printed console insert to allow a 2-DIN unit. I've done a 3d-printed cradle for my amps already. Doing the 3d model of even a simple part takes non-trivial time. And printing costs are non-trivial too.
That said (tongue in cheek) the next major iteration of my stereo may involve a 3d-printed console insert to allow a 2-DIN unit. I've done a 3d-printed cradle for my amps already. Doing the 3d model of even a simple part takes non-trivial time. And printing costs are non-trivial too.
#47
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,484
Received 1,634 Likes
on
1,065 Posts
...It sometimes bogs down and takes a while to become responsive to controls - have not had it crash at all. Some control combinations seems to stop responding in certain modes but others still wake it back up. It is slow to startup every time as it need to boot-up. Quirky and not quite "finished for prime time"
I have not experienced the HW issue of it cutting out over bumps etc - that sounds mostly like a poor installation issue to me.
I think I'm going to go with the DEH-80PRS or one of the Apline mech-less units that replacd the iDA series.
#48
Drifting
That said (tongue in cheek) the next major iteration of my stereo may involve a 3d-printed console insert to allow a 2-DIN unit. I've done a 3d-printed cradle for my amps already. Doing the 3d model of even a simple part takes non-trivial time. And printing costs are non-trivial too.
If you were serious and can mock something up I'd buy it.
Say the word and let me know where to send my monies.
#49
Rennlist Member
Since I am the owner of this idea, the intellectual property is clearly mine so the money can be sent directly to my bankaccount. Thank you.
I might even make some extra of these
patent pending
Last edited by Ad0911; 05-20-2014 at 11:05 AM. Reason: addition
#50
Drifting
I am planning on making one from wood and cover it with leather (I happen to have the right green leather for my car).
Since I am the owner of this idea, the intellectual property is clearly mine so the money can be sent directly to my bankaccount. Thank you.
I might even make some extra of these
patent pending
If so it just so happens I have the same color in my car
Sounds to me like maybe it was meant to be
#51
Porsche Classic Head Unit
Has anyone actually fitted one of these? I'm really keen to get one from an authenticity perspective but I want to be sure it fits well in the dash (doesn't sit proud, which looks rubbish in a 928) and looks good in situ.