Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

Just finished my 1st flex plate / crank end play check

Thread Tools
 
Search this Thread
 
Old 08-23-2014 | 11:47 PM
  #106  
Bertrand Daoust's Avatar
Bertrand Daoust
Rennlist Member
 
Joined: Oct 2005
Posts: 5,198
Likes: 1,352
From: Gatineau, Québec, Canada
Default

Hey Jon,

17 Ft.lbs is good... With blue Loctite on the bolts.
Did you put blue Loctite too on the clamp bolt?

Always do.
Just asking.
Old 08-24-2014 | 12:05 AM
  #107  
Captain_Slow's Avatar
Captain_Slow
Thread Starter
Drifting
 
Joined: May 2010
Posts: 2,095
Likes: 26
From: Northern Virginia
Default

Hello Bertrand - I did not...but I did see your post earlier in this thread just before I posted my update . Darn... The PKlamp instructions only specify the blue stuff for the PKlamp bolts. Nothing for the factory clamp. I'm picking up the Loctite and the Allen socket tomorrow (I hope...it's Sunday). Also need a large clean funnel and some clear hose - refilling the auto trans after replacing filter and gasket. My last under-the-car jobs before Frenzy. Fingers crossed for no leaks.



Quick Reply: Just finished my 1st flex plate / crank end play check



All times are GMT -3. The time now is 09:29 AM.