Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

Just finished my 1st flex plate / crank end play check

Thread Tools
 
Search this Thread
 
Old 08-23-2014, 10:47 PM
  #106  
Bertrand Daoust
Rennlist Member
 
Bertrand Daoust's Avatar
 
Join Date: Oct 2005
Location: Gatineau, Québec, Canada
Posts: 5,193
Received 1,347 Likes on 511 Posts
Default

Hey Jon,

17 Ft.lbs is good... With blue Loctite on the bolts.
Did you put blue Loctite too on the clamp bolt?

Always do.
Just asking.
Old 08-23-2014, 11:05 PM
  #107  
Captain_Slow
Drifting
Thread Starter
 
Captain_Slow's Avatar
 
Join Date: May 2010
Location: Northern Virginia
Posts: 2,095
Received 26 Likes on 22 Posts
Default

Hello Bertrand - I did not...but I did see your post earlier in this thread just before I posted my update . Darn... The PKlamp instructions only specify the blue stuff for the PKlamp bolts. Nothing for the factory clamp. I'm picking up the Loctite and the Allen socket tomorrow (I hope...it's Sunday). Also need a large clean funnel and some clear hose - refilling the auto trans after replacing filter and gasket. My last under-the-car jobs before Frenzy. Fingers crossed for no leaks.



Quick Reply: Just finished my 1st flex plate / crank end play check



All times are GMT -3. The time now is 07:32 PM.