New DEVEK level 2 headers
#19
you don't have to pull the engine to get these on. I just added the headers when I did my pan spacer. Support the engine from above and drop the crossmember/rack... goes up and in pretty easily. Mine had a custom X when I got it (from Mark A (928 Intl) from Rob Rossito's car...Still need to fab the rest of the exhaust.
#21
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Dec 2003
Location: Houston
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
You do not have to drop the crossmember or anything that drastic. A few extensions and swivel on your ratchet is all you need for the two worst nuts on the header/head flange. I've installed several of these.
#22
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Dec 2003
Location: Houston
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
I forgot, been a long time, theyfit 32v cars. They are drilled for both the 85-86 928 and the S4/GTS 928
Last edited by wildguy; 11-26-2013 at 11:17 AM.
#23
Drifting
#24
Rennlist Member
#26
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
These are not sold yet????
#27
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Dec 2003
Location: Houston
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
I have 3 sets left.
They fit the 85-86 32v 928 and later 928.
Jim Murphy (formerly DEVEK) and I believe they are drilled for the 16v cars too (hence the 2 bolt patterns) but not 100%.
They fit the 85-86 32v 928 and later 928.
Jim Murphy (formerly DEVEK) and I believe they are drilled for the 16v cars too (hence the 2 bolt patterns) but not 100%.