84-88 Rear Speaker Upgrade Kits - Now available
#46
Three Wheelin'
Found it. Green = positive. Here is the thread for the '87 wiring diagram for stereo.
https://rennlist.com/forums/928-foru...1985-928s.html
https://rennlist.com/forums/928-foru...1985-928s.html
#47
I know this is an old thread but I found this and mimic the design and 3D printed it. Wanna share it for anyone needing this. Certainly fixed my speaker just flopping around in there. Previous owner put that speaker in, and while it works it wasn't held in with anything but gravity.
https://www.tinkercad.com/things/7Rzop5T1mtt
https://www.tinkercad.com/things/7Rzop5T1mtt
The following 4 users liked this post by dukenukemx:
auto-quixotic (09-14-2023),
Hank928 (07-24-2023),
Michael Benno (07-11-2023),
z driver 88t (07-12-2023)
#48
I know this is an old thread but I found this and mimic the design and 3D printed it. Wanna share it for anyone needing this. Certainly fixed my speaker just flopping around in there. Previous owner put that speaker in, and while it works it wasn't held in with anything but gravity.
https://www.tinkercad.com/things/7Rzop5T1mtt
https://www.tinkercad.com/things/7Rzop5T1mtt
The following users liked this post:
dukenukemx (10-04-2023)
#49
FYI for anyone else finding this thread - this file is great but it does not fit the Earthquake SWS drivers as-is. Their baskets are wider than those Pioneers pictured above. The opening needs to be widened. I am going to just use a Dremel (I ordered the mounts - very inexpensive to get printed in ABS from Craftcloud 3d) but anyone with CAD software could make the adjustment easily I'm sure. Regardless, thank you @dukenukemx for your contribution!