Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

What did you do to get ready for SITM?

Thread Tools
 
Search this Thread
 
Old 05-26-2013, 12:22 AM
  #1  
Adamant1971
Rennlist Member
Thread Starter
 
Adamant1971's Avatar
 
Join Date: Aug 2011
Posts: 6,474
Received 1,079 Likes on 508 Posts
Default What did you do to get ready for SITM?

I know we are all frantically getting our cars ready for SITM. I thought it would be neat to see what everyone is doing and what some of the common items are.

I will start.

-new spark plugs and wires
-87 FPR
-Ken's chips
-chased vacuum leak in hvac and disabled vacuum line to comb flap (temporary)
-re-painted sunroof
-fixed loose centre console with jäger kit
-pulled after market alarm and all wiring
-pulled stealth 80's radar detector and all wiring
-installed TQ rings
-cleaned oil from intake plenum s
-changed oil and filter
-tightened up rad hoses
-released tension on flex plate and re-torqued clamp and p-klamp
-lined hatch with cache sound proofing
-cleaned fuel sender contacts
-had AC system vacuumed and filled with dye and r134
-clean, clean, clean and clean
Old 05-26-2013, 01:52 AM
  #2  
jcorenman
Rennlist Member
 
jcorenman's Avatar
 
Join Date: Jan 2008
Location: Friday Harbor, WA
Posts: 4,058
Received 310 Likes on 151 Posts
Default

You are putting us to shame, we changed the oil

Old 05-26-2013, 08:03 AM
  #3  
oups59
Three Wheelin'
 
oups59's Avatar
 
Join Date: Jan 2005
Location: Shefford,Quebec
Posts: 1,899
Received 52 Likes on 30 Posts
Default

Tire pressure check
Old 05-26-2013, 10:01 AM
  #4  
Bilal928S4
Drifting
 
Bilal928S4's Avatar
 
Join Date: Apr 2011
Location: New Canaan, CT
Posts: 2,871
Likes: 0
Received 15 Likes on 9 Posts
Default

Changed oil and filled with valvoline VR-1.
Still trying to button the AC system up with all new O rings and a new compressor. Will install the new compressor tomorrow and pressure test, vacuum, fill up with R12.
Will also check tire pressure before I leave.
Old 05-26-2013, 10:28 AM
  #5  
AirtekHVAC
Rennlist Member
 
AirtekHVAC's Avatar
 
Join Date: Mar 2012
Location: China Grove, NC
Posts: 3,563
Received 300 Likes on 181 Posts
Default

Got her our of the shop, 1st time since June, last year, 1st time under her own power, and decided to clean the glass...yuk....AND I don't even know if I'll be able to bring her yet.....
Attached Images  
Old 05-27-2013, 07:15 PM
  #6  
jej3
Three Wheelin'
 
jej3's Avatar
 
Join Date: Feb 2004
Location: Jacksonville and sometimes St. Aug Beach, FL
Posts: 1,727
Received 341 Likes on 171 Posts
Default Here's my list....

Here's my list.... (one of the reasons I REALLY love SITM!)

Mechanical or Safety Related
  • Replace Windshield (Due to Crack @ last year's SITM)
  • Coolant Refresh with Water Wetter (to do - might not get done)
  • Release flex plate tension and Re-tension Porkens + Original Clamp
  • Make Minor Adjustment to steering wheel
  • Replace fuel pump
  • Replace any suspect 53 relays
  • Check Transmission Fluid
  • Change oil and air filter
  • Recharge ac
  • Replace passenger side fuel line
  • Clean grounds

Aesthetic
  • Re-Paint and Add Decals to Calipers
  • Install Jager Speedmount (motor mounts next year )
  • Install Jager Lock Dress Up kit
  • Install Nicole/Jager's Rear Nickel Letter kit
  • Install Clear turn indicators from Nicole in Bumper and on sides of car


Infotainment
  • Correct Left Side Channel intermittent fail on Stereo (two new sets of RCAs to Pre-Amp corrected)
  • Configure Microsoft Surface for Road Trip
    -Purchase Windshield Mount
    -Procure usb gps
    -Add 5000 song music library
  • Purchase lightweight inverter in case needing charge while driving
  • Install Powerport(s) in passenger footwell (to do)[/INDENT]
  • Crack Windows Mobile Phone to act as a hotspot for in-car Internet

Other
  • Full detail (to do this week)
  • Renew AAA Premium Membership
  • Make tee times for Sunday or Monday in/around Banner Elk
Old 05-27-2013, 09:04 PM
  #7  
AO
Supercharged
Rennlist Member
 
AO's Avatar
 
Join Date: May 2002
Location: Back in Michigan - Full time!
Posts: 18,925
Likes: 0
Received 60 Likes on 34 Posts
Default

There are still a few days before SITM...
Old 05-28-2013, 06:39 AM
  #8  
Bilal928S4
Drifting
 
Bilal928S4's Avatar
 
Join Date: Apr 2011
Location: New Canaan, CT
Posts: 2,871
Likes: 0
Received 15 Likes on 9 Posts
Default

Finished charging the AC last night. Getting 40F sir at the center vent.
Installed new left side rear wheel well liner.
Old 05-28-2013, 08:13 AM
  #9  
Harvey928
Burning Brakes
 
Harvey928's Avatar
 
Join Date: Feb 2011
Location: Cottonwood SD
Posts: 787
Received 284 Likes on 155 Posts
Default

Installed Greg Brown fuel hoses
Checked and topped off transmission fluid
changed oil and filter
Replaced dash light bulbs that were burnt out
Installed p-klamp and released tension on flex plate
Old 05-28-2013, 08:58 AM
  #10  
auzivision
Drifting
 
auzivision's Avatar
 
Join Date: Jun 2006
Location: Indianapolis Area
Posts: 2,707
Received 73 Likes on 39 Posts
Default

Drained and refilled coolant. Oil change. Traced no start issue to ground strap glycol bath.

Still need to fix dash light and maybe wash it.
Old 05-28-2013, 08:28 PM
  #11  
AirtekHVAC
Rennlist Member
 
AirtekHVAC's Avatar
 
Join Date: Mar 2012
Location: China Grove, NC
Posts: 3,563
Received 300 Likes on 181 Posts
Default

Damn Harvey...slow down!!!

I got her loaded up to go to the muffler shop....clutch is grabbing much better...must have just been rusty. Borrowed trailer is a bit narrow...I put a scratch on the fender...dammit!


I'll post the pic tonight....for some reason all my pics are suddenly too large, and I have to edit them down on the computer....
Attached Images  

Last edited by AirtekHVAC; 05-28-2013 at 10:25 PM.
Old 05-28-2013, 10:17 PM
  #12  
KY928
Instructor
 
KY928's Avatar
 
Join Date: Mar 2007
Location: Sadieville, Ky
Posts: 146
Likes: 0
Received 0 Likes on 0 Posts
Default

Check oil
check tire pressure
Clean Windows
Install GPS mount to windshild
Fill with fuel on the way out
Old 05-30-2013, 10:33 AM
  #13  
hans14914
Rennlist Member
 
hans14914's Avatar
 
Join Date: Aug 2003
Location: Indianapolis
Posts: 2,615
Likes: 0
Received 287 Likes on 122 Posts
Default

1. Installed transmission
2. Installed torque tube
3. Installed engine

I am sure I missed a couple things...
Old 05-30-2013, 11:06 AM
  #14  
Rod Underwood
Rennlist Member
 
Rod Underwood's Avatar
 
Join Date: Aug 2005
Location: Muncie, Indiana
Posts: 1,371
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by hans14914
1. Installed transmission
2. Installed torque tube
3. Installed engine

I am sure I missed a couple things...
Looks like you got the really important things. Have a beer for me or a margarita. :-)
Old 05-30-2013, 07:08 PM
  #15  
jej3
Three Wheelin'
 
jej3's Avatar
 
Join Date: Feb 2004
Location: Jacksonville and sometimes St. Aug Beach, FL
Posts: 1,727
Received 341 Likes on 171 Posts
Default

Originally Posted by jej3
Here's my list.... <SNIP>

Infotainment
  • [*]
Mount for the MSFT Surface Pro is ready to go. Mappoint 2013 and several thousand songs loaded.



Quick Reply: What did you do to get ready for SITM?



All times are GMT -3. The time now is 05:21 PM.