Do these pictures need captions? (32V Intake Manifold Study - HP)
#286
Former Vendor
Thread Starter
I'm completely lost in whatever conversation Dr. Bob and Tuomo are having.
Does it have anything to do with my manifold?
Update: Plenum is now cut apart.
"Housekeeping" tasks and some design changes.
Retesting soon.
Does it have anything to do with my manifold?
Update: Plenum is now cut apart.
"Housekeeping" tasks and some design changes.
Retesting soon.
#288
Archive Gatekeeper
Rennlist Member
Rennlist Member
Whose driver's license will we be risking with the next round of datalogging?
#290
Three Wheelin'
No problem, just go to Kinkos & make one of these:
http://scottystarnes.files.wordpress...pg?w=500&h=323
http://scottystarnes.files.wordpress...pg?w=500&h=323
#292
Rennlist Member
Join Date: Jan 2012
Location: Oklahoma City, Oklahoma
Posts: 1,158
Likes: 0
Received 0 Likes
on
0 Posts
#294
Archive Gatekeeper
Rennlist Member
Rennlist Member
Not if you're at work.
#295
Nordschleife Master
That conversation is/was somewhat off topic, but perhaps not as much as some of the later entries.
#296
Archive Gatekeeper
Rennlist Member
Rennlist Member
Point well taken, Tuomo.
#297
Nordschleife Master
#298
Archive Gatekeeper
Rennlist Member
Rennlist Member
If that was my wife (or my girlfriend) would I be posting on Rennlist right now? Let me answer that- No.
Actually, while I was scanning the new avatar pic, I came across the next figure in the article (928 Forum magazine, Summer 2002)
https://webfiles.uci.edu/redwards/pu...2012-22-12.pdf
Comparison of stock S4 intake runner flow at various valve lifts. Forgive me if this is an Enzo, but I'd forgotten that this data exists. Might be germane to the discussion (?) I assume that the 40 mm Ti refers to titanium 40 mm intake valves (?)
Actually, while I was scanning the new avatar pic, I came across the next figure in the article (928 Forum magazine, Summer 2002)
https://webfiles.uci.edu/redwards/pu...2012-22-12.pdf
Comparison of stock S4 intake runner flow at various valve lifts. Forgive me if this is an Enzo, but I'd forgotten that this data exists. Might be germane to the discussion (?) I assume that the 40 mm Ti refers to titanium 40 mm intake valves (?)
#300
Rennlist Member
That is correct. My recollection is that when Threshie installed the 40mm intakes, he discovered that there wasn't room for the stock exhaust valve, so that he actually had to go to 1mm smaller exhaust valve to make room for the larger intake. Don't know if there's truth to that, just my recollection.