I am in the tank - just got my 928!
09-27-2012, 06:11 PM
#61
Rennlist Member
I will do my utmost to get it to Frenzy...
12 year old timing belt needs to be replaced this weekend. PO felt comfortable driving on belt with less than 8000 miles on it. UPS/USPS/FedEx Ground should be leaving goodies today, tomorrow and Friday including a flywheel lock tool (until now my flywheel lock tool was big pair of vice grips clenching the ring gear/flywheel or a prybar), porkensioner, T-Belt, WP, accessory belts, rad hoses and some fuel line.
Hoping that a 1/2 drive breaker bar, a cheater pipe and a 6 point 27 mm impact socket will break the crank bolt loose. (Remind me that whatever the temptation, NEVER use an air gun on a crank bolt).
What size bolts do I need for the flywheel tool 6mm? 8mm? 20 or 25mm long?
12 year old timing belt needs to be replaced this weekend. PO felt comfortable driving on belt with less than 8000 miles on it. UPS/USPS/FedEx Ground should be leaving goodies today, tomorrow and Friday including a flywheel lock tool (until now my flywheel lock tool was big pair of vice grips clenching the ring gear/flywheel or a prybar), porkensioner, T-Belt, WP, accessory belts, rad hoses and some fuel line.
Hoping that a 1/2 drive breaker bar, a cheater pipe and a 6 point 27 mm impact socket will break the crank bolt loose. (Remind me that whatever the temptation, NEVER use an air gun on a crank bolt).
What size bolts do I need for the flywheel tool 6mm? 8mm? 20 or 25mm long?
