Never underestimate the power of a slammed door.
08-29-2012, 02:56 PM
#1
Drifting
Thread Starter
Never underestimate the power of a slammed door.
Down to just a few things to do on Marvin. Have not been able to get the windshield wipers to work. My brother and I went to the post office the other day. When he got in the passenger side...he SLAMMED the door shut. I started to get pissed and then.....the wipers started doing their thing. I must of left them on from the last round of repairs. Anyway.....if it doesn't work and you don't have a clue where to go next....slam the door.
Now to get the speedo and od to work.
Now to get the speedo and od to work.
Last edited by Dean_Fuller; 08-29-2012 at 05:12 PM. Reason: Can't spell...or type
08-29-2012, 03:20 PM
#3
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Still remember in the Factory workshop manual section on automatic transmissions after several other recommendations for a shifting problem it Says, hit the housing with a wooden mallet ! Sometimes you just have to get the cars attention 
08-29-2012, 05:07 PM
#4
Drifting
Thread Starter
08-29-2012, 05:10 PM
#5
Drifting
Thread Starter
08-29-2012, 05:15 PM
#6
Three Wheelin'
No, slamming the door induces a voltage of over 9000V, thus overheating and reflowing all the PCB's in the car, this is what fixed it...
Lol, just kidding.
Lol, just kidding.
Trending Topics
08-29-2012, 08:22 PM
#9
Pro
Join Date: Aug 2010
Location: 3rd Rock From The Sun
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
Down to just a few things to do on Marvin. Have not been able to get the windshield wipers to work. My brother and I went to the post office the other day. When he got in the passenger side...he SLAMMED the door shut. I started to get pissed and then.....the wipers started doing their thing. I must of left them on from the last round of repairs. Anyway.....if it doesn't work and you don't have a clue where to go next....slam the door.
Now to get the speedo and od to work.
Now to get the speedo and od to work.
)
