IcemanG17

http://www.tirerack.com/wheels/Wheel...All&sort=Brand

Tirerack has TR motorsports 18x10x65mm wheels on blowout clearance.....84% off or only $99 per wheel!!!!!!!!!!!!!!!!!!!!!!!!!!!! Lots of guys I ran with that own M3's used these wheels and loved them...plus they are light at 22lbs (barely heavier than stock 16")......

I bought 6!!!! Bummer is shipping was steep....but still $825 for 6 wheels to the west coast...only $137 each on my door!!!

Time to step up to some WIDE racing tires!!!!!

Bilal928S4

Will these fit the front of a stock S4 or GT? What would fit the rear?
Bilal

RCinXS

Wow. Outstanding if you like the look!

fraggle

I'm a little lost, too. Would these really fit both ends? Or do you have to hunt for fronts somewhere?

IcemanG17

They will fit the rear no problem on any 928....they will fit the front, but will require a bit of fender rolling depending on how wide of tire you want to run...I have run 265/35-18 on this offset with no issues up front, but I do have rolled fenders in front, which is really just a flattened inner lip

mark kibort

im running 10s with my 8" back spacing wheels up front. also using 1/4" spacers because i have the fenders rolled and pulled out (racer mod). with out it, the 10s up front are not a big deal with a 275 up front. im not convinced 63mm offset is an 8" backspacing, but when you get a chance brian, can you put a level and measuring tape to the rear of the wheel to check?

nice find!

mark kibort

just read the specs! awesome find! yes, 8" backspacing ("8.03")
remember i also have a set of 10" rims that i run the 315s on and those rims are 8.5" backspacing. they fit perfect with my fender mods (all stock fender, with just slight mounting modifications)

James Bailey

65 mm is 2.559 inches off the centerline so 1/2 of 10 is 5, plus 2.55 is 7.55 of rear "lip" leaves a bit much to the outside for any stock car......

cfc928gt

Auto Parts Warehouse has the 10" in a 58 offset for $59 each

mark kibort

that would be pushing it both front and rear.

mark kibort

everyone saw the 8" backspacing 9.5 rims on the stock 87 i left 928intl a couple years ago (my new racer after 928intl helped with the holbert to new car transfer) with no mods, no rolling with 275s. you only need .5" of space more, most of which is just the rolling of the fender for that. on a stock car, all you would need would to be running 255s up front and its a done deal.

cfc928gt

Absolutely true, but in my book 65 on a 10" rim is too far out for the front anyhow. For those who want to do it however, the 58 offset should work for the rear and the $59 price includes shipping - or at least they advertise orders over $50 include free shipping.

heinrich

Any pix of these on a 928?

Adamant1971

Looks like a bunch of stuff on clearence.

These too.
http://www.tirerack.com/wheels/Wheel...All&sort=Brand

Scratch that, they are 15mm

Richard S

No way. 15mm offset is probably for 911's.

Rich