Rust Repair
#2
Rest in Peace
Rennlist Member
Rennlist Member
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
Are you serious?
If you have the skills to replace a patch panel in that location, the you have the skills to repair that rusted out spot with out cutting the car up.
Not a place to be starting out trying on as far as cutting parts out and welding them in.
My $.02 worth.
If you have the skills to replace a patch panel in that location, the you have the skills to repair that rusted out spot with out cutting the car up.
Not a place to be starting out trying on as far as cutting parts out and welding them in.
My $.02 worth.
#4
Rest in Peace
Rennlist Member
Rennlist Member
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
To do it right you need a fender, and that is not for the weak of heart, not even sure you can get a fender from Porsche for that car any more.
If it were mine I would either replace the fender or make patch panels to fit and weld up the holes that were left.
The reason I say that is you really do not want to disturb the area where the window seal goes into unless you have to, that will be a bitch to get lined up right and sealed.
A welder and filler will be needed to do this.
We have a couple of good body guys that will chime in I am sure.
#5
Rennlist Member
Are you serious?
If you have the skills to replace a patch panel in that location, the you have the skills to repair that rusted out spot with out cutting the car up.
Not a place to be starting out trying on as far as cutting parts out and welding them in.
My $.02 worth.
If you have the skills to replace a patch panel in that location, the you have the skills to repair that rusted out spot with out cutting the car up.
Not a place to be starting out trying on as far as cutting parts out and welding them in.
My $.02 worth.
Jerry Feather
#6
Rennlist Member
The window will have to come out, and the area cleaned up to see just how far trhe rust has gone, then fashion the necessary small pieces of sheet metal that will be needed to weld into the area.
Jerry Feather
#7
Racer
Thread Starter
Join Date: Aug 2011
Location: Fayetteville AR
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
This is not a bondo repair nor is it a fender replacement repair. There is a whole lot that can be done with a torch and some small pieces of sheet metal that can repair this spot without either of the above.
The window will have to come out, and the area cleaned up to see just how far trhe rust has gone, then fashion the necessary small pieces of sheet metal that will be needed to weld into the area.
Jerry Feather
The window will have to come out, and the area cleaned up to see just how far trhe rust has gone, then fashion the necessary small pieces of sheet metal that will be needed to weld into the area.
Jerry Feather
Trending Topics
#9
Rennlist Member
Its a complex fender. Its also possible to TIG a patch panel to perfection.
Its also an inexpensive yet cool car, as - is.
Keep your head held high on this one. Everybody suspects there is at least (purchase price)value in it, just mechanically.
A handful of enthusiasts willl have perfect, original cars.
Another couple handfuls have refreshed ones that amazing.
Many of us have a great deal of enjoyment just participating.
Its also an inexpensive yet cool car, as - is.
Keep your head held high on this one. Everybody suspects there is at least (purchase price)value in it, just mechanically.
A handful of enthusiasts willl have perfect, original cars.
Another couple handfuls have refreshed ones that amazing.
Many of us have a great deal of enjoyment just participating.
#10
Rest in Peace
Rennlist Member
Rennlist Member
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
Its a complex fender. Its also possible to TIG a patch panel to perfection.
Its also an inexpensive yet cool car, as - is.
Keep your head held high on this one. Everybody suspects there is at least (purchase price)value in it, just mechanically.
A handful of enthusiasts willl have perfect, original cars.
Another couple handfuls have refreshed ones that amazing.
Many of us have a great deal of enjoyment just participating.
Its also an inexpensive yet cool car, as - is.
Keep your head held high on this one. Everybody suspects there is at least (purchase price)value in it, just mechanically.
A handful of enthusiasts willl have perfect, original cars.
Another couple handfuls have refreshed ones that amazing.
Many of us have a great deal of enjoyment just participating.
#11
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
The trick is getting someone who is good enough to butt weld in the patches (overlapping is for amateurs) and metal finish the area so all it needs is a very thin swipe of filler. All of which takes time and skill. As noted you wish to minimize the amount of metal replaced. Porsche used to sell portions of the 1/4 panel for just that reason. The bit around the gas filler might be easier to use a chunk of a 1/4 for the shape that should be easy to find and a small piece is pretty cheap to ship.....full 1/4s get expensive to ship.
#12
Rennlist Member
Greg - what is that item in the picture above the gas tank that flows up to the C pillar, and would otherwise be hidden behind the rear fender panel? Is that an auxillary tank of some sort?
#14
Rennlist Member
I'm sure this shows my ignorance but does anybody use lead anymore?
The factory used it, in the old days at least, but I think they had a special light weight lead.
The factory used it, in the old days at least, but I think they had a special light weight lead.
#15
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Lead is pretty much a lost art.....and it was HEAVY the term "lead sled" for those wild 50s chopped channeled frenched sectioned and molded cars really meant they were HEAVY .....