DD Clutch problem
#16
If you have a new master cylinder it will have to be cut, and a coil or two cut off the spring.
Also be aware that the guide tube is a different length on a DD and a SD clutch.
On your bellhousing, some thing had to come loose for it to do that.
Also be aware that the guide tube is a different length on a DD and a SD clutch.
On your bellhousing, some thing had to come loose for it to do that.
Thanks Mrmerlin
1.I have new release arm bushing.
2.I bought new master and slave cylinder from 928 internation.
Question
I use 85 row parts for convert, I refresh all the clutch parts.
My question is
1. Should I cut shorter of master cylinder piston? 4.5MM, right?
2. Shorter the spring, you mean short this (928 423 357 04) spring parts?
1.I have new release arm bushing.
2.I bought new master and slave cylinder from 928 internation.
Question
I use 85 row parts for convert, I refresh all the clutch parts.
My question is
1. Should I cut shorter of master cylinder piston? 4.5MM, right?
2. Shorter the spring, you mean short this (928 423 357 04) spring parts?